Wellcraft decals
 

Thought those price stickers stores put on items were hard to remove. Boy, was I wrong. The wellcraft decals have been on the boat for 29 years and never budged. Is there a simple way to remove them? Have been using a razor blade scraper. A slow process, plus it leaves all the glue on the hull.
Next question, where can I get new decals? Don't tell me that I was suppose to keep the old ones.

Re: Wellcraft decals
 

You can use a blow drier to warm them up and a plastic putty knife to scrape them - look on ebay for the decals

Re: Wellcraft decals
 

Use goo-off and a razor. Works great.

Re: Wellcraft decals
 

Look under links and then decals. I have not yet bought any, hope the site is good. Single edge rasor and laquer thinner for removal.

Re: Wellcraft decals
 

look on ebay under "wellcraft" i got some from a seller named "taylorint" and they are pretty nice ;)

Re: Wellcraft decals
 

As has been siad, a hair dryer or a heat gun, but if you use a heat gun becareful not to over heat!!

After the sticker is off use lacqer thiner or goo gone.

Re: Wellcraft decals
 

Take a chainsaw and cut closely around stubborn decal...leaves no adhesive residue...repair fiberglass and gelcoat, then reapply decal from E-Bay...just














































KIDDIN ;D ...

Re: Wellcraft decals
 

lol!! ;D

Re: Wellcraft decals
 

Hey, that's not a bad idea.

I could put my anchor through the hole left from removing the stickers with a chainsaw. ;) ;) ;D

Re: Wellcraft decals
 

Man, I hope you can find a better way ;) ...

Re: Wellcraft decals
 

I removed the decals from my V21 two years ago (there is a picture in my gallery - before and after). A hair drier and razor made it realy easy - though it does take some time.

Re: Wellcraft decals
 

allthe sign painter and vynil guys around here use oven cleaner or gasket remover, just spray on, wait till the sticker bubbles, scrap off with a palstic putty knife, and wash off, just don't let it dry out on you

Re: Wellcraft decals
 

Ooo...whadda good idea ;) ...

Re: Wellcraft decals
 

If in drys out out you will have a spot you won't want any one to ever see!! Becareful!

Re: Wellcraft decals
 

its not that big of a deal, after you spray the decal, adn scrape it off, just hose it down and scrub it with a brush, i let some dry on my old boat, it didn't harm teh gel, just had a bear of a time getting the goo off

Re: Wellcraft decals
 

Hell with those decals, I want one of thos stainless steel one's that M.J. has on the back of his truck. ;D

Re: Wellcraft decals
 

All decals and boot striping is gone, thanks to your good advice. Used a hair dryer then goof off. Found out if you parient ( no one of my virtures) and let the hair dryer do it's thing glue and all will peel right off. Thank all of you for your advice.

Re: Wellcraft decals
 

All decals and boot striping is gone, thanks to your good advice. Used a hair dryer then goof off. Found out if you parient ( no one of my virtures) and let the hair dryer do it's thing glue and all will peel right off. Thank all of you for your advice.

Re: Wellcraft decals
 

Good job, but where are the Pics. of the work. LOL. ;D

Re: Wellcraft decals
 

I still liked the chain saw idea ;D ;D ;D ;D. Are you going to put new decals on?

Re: Wellcraft decals
 

Good work!

Thats one of 3 in the world!! That was coustom made from a member here a couple of years ago! The first one was a bit messed up, and I have noidea if it is still around? But 2 of them Mine and his are and being used everyday!!
I don't use mine in the summer as either I am towing the boator the camper.

I was able to get it fro free!! ;D ;)

Re: Wellcraft decals
 

HAMMER, April 23 to 27, I am back in Venezuela.
Our plant has a wire EDM machine.

hint, hint, wink, wink.

Re: Wellcraft decals
 

Make sure Hugo and his boys don't show up ;) ...

Re: Wellcraft decals
 

Reel, it is a different country since he took over.
I am always looking over my shoulder and sleeping with one eye open,
while I'm there.

Empowering poor, UN-educated people, is not always a good thing.

Re: Wellcraft decals
 

Particularly when they're GREEDY THUGS :P ... the people I've met from Ven. are wonderful, good people...it's a shame a bully like that can rise to power :-/ ...

Re: Wellcraft decals
 

Exactly.

It is easy when you bring in peopel from Cuba and
Africa to sway the vote your way.

Re: Wellcraft decals
 

Surprising he goes to the trouble ::)...why not just declare yourself KING and get it over with?...

Re: Wellcraft decals
 

M.J. has me thinking here. Found this site, unless Parissht can pull something off in one of those 3rd worl countries. ;D

http://www.bigbluesaw.com/saw/compon...amp;material=/

Re: Wellcraft decals
 

Notice, they did not give any idea of price.

My guesstimate from getting prototype parts made,
$75 - 100.

I have some other tooling connections, if I can't get it made down there.

Reel, I think that is next, he is following the Castro template.

Re: Wellcraft decals
 

Ya know what they say..."thugs of a feather..." and all... ::) ...