Got some work done today!
 

With the help of my son I got some stuff done today!

Got the cover off, and disasambled the frame work. *I made it all from 1 1/2 PVC. *Some parts are glued, and most screwed so that it comes apart for storage.

http://syncboard.com/albums/Boat-Tac..._032_Small.jpg

http://syncboard.com/albums/Boat-Tac..._033_Small.jpg

http://syncboard.com/albums/Boat-Tac..._034_Small.jpg

http://syncboard.com/albums/Boat-Tac..._035_Small.jpg

Then went to work replacing the old tank vents, they had plastic covers, one was lost and one was good, replaced with new Stainless ones.
Note that I have moved the vents up on the step down from the windshield, the old vents were under the rub rail, and when you trailer they leak gas out of them all the time!!
Did this years ago and have never leaked a drop again!!

Old

http://syncboard.com/albums/Boat-Tac..._042_Small.jpg

Friend Pete stoped by and my son working on the vents

http://syncboard.com/albums/Boat-Tac..._040_Small.jpg

Son taking a break

http://syncboard.com/albums/Boat-Tac..._039_Small.jpg

New Vents installed

http://syncboard.com/albums/Boat-Tac..._041_Small.jpg

Then it was off to the Tac, removed the Yamaha all in one and added this new to me off ebay one for the Evinrude. *Its not wired yet I have to get the harness but it is in!
And after inspection of my sons work it is stright now *:-/

http://syncboard.com/albums/Boat-Tac..._043_Small.jpg

http://syncboard.com/albums/Boat-Tac..._044_Small.jpg

Then it was off to replace all 20 rusty lug nuts with New Stainless ones.

Old

http://syncboard.com/albums/Boat-Tac..._045_Small.jpg

http://syncboard.com/albums/Boat-Tac..._046_Small.jpg

New

http://syncboard.com/albums/Boat-Tac..._050_Small.jpg

http://syncboard.com/albums/Boat-Tac..._051_Small.jpg

And were was I all day when my son was changing the Lugs?? *Supervising of coarse!!

Got to keep that foot up you know!!

http://syncboard.com/albums/Boat-Tac..._049_Small.jpg

http://syncboard.com/albums/Boat-Tac..._048_Small.jpg

Got some work done today!
 

With the help of my son I got some stuff done today!

Got the cover off, and disasambled the frame work. *I made it all from 1 1/2 PVC. *Some parts are glued, and most screwed so that it comes apart for storage.

http://syncboard.com/albums/Boat-Tac..._032_Small.jpg

http://syncboard.com/albums/Boat-Tac..._033_Small.jpg

http://syncboard.com/albums/Boat-Tac..._034_Small.jpg

http://syncboard.com/albums/Boat-Tac..._035_Small.jpg

Then went to work replacing the old tank vents, they had plastic covers, one was lost and one was good, replaced with new Stainless ones.
Note that I have moved the vents up on the step down from the windshield, the old vents were under the rub rail, and when you trailer they leak gas out of them all the time!!
Did this years ago and have never leaked a drop again!!

Old

http://syncboard.com/albums/Boat-Tac..._042_Small.jpg

Friend Pete stoped by and my son working on the vents

http://syncboard.com/albums/Boat-Tac..._040_Small.jpg

Son taking a break

http://syncboard.com/albums/Boat-Tac..._039_Small.jpg

New Vents installed

http://syncboard.com/albums/Boat-Tac..._041_Small.jpg

Then it was off to the Tac, removed the Yamaha all in one and added this new to me off ebay one for the Evinrude. *Its not wired yet I have to get the harness but it is in!
And after inspection of my sons work it is stright now *:-/

http://syncboard.com/albums/Boat-Tac..._043_Small.jpg

http://syncboard.com/albums/Boat-Tac..._044_Small.jpg

Then it was off to replace all 20 rusty lug nuts with New Stainless ones.

Old

http://syncboard.com/albums/Boat-Tac..._045_Small.jpg

http://syncboard.com/albums/Boat-Tac..._046_Small.jpg

New

http://syncboard.com/albums/Boat-Tac..._050_Small.jpg

http://syncboard.com/albums/Boat-Tac..._051_Small.jpg

And were was I all day when my son was changing the Lugs?? *Supervising of coarse!!

Got to keep that foot up you know!!

http://syncboard.com/albums/Boat-Tac..._049_Small.jpg

http://syncboard.com/albums/Boat-Tac..._048_Small.jpg

Re: Got some work done today!
 

Good job MJ.

I learned this winter that I have to work on my PVC winter cover supports.
I thought wire ties would be enough, but whne the cover rips and flops in the wind,
all bets are off.

Re: Got some work done today!
 

Good job MJ.

I learned this winter that I have to work on my PVC winter cover supports.
I thought wire ties would be enough, but whne the cover rips and flops in the wind,
all bets are off.

Re: Got some work done today!
 

Nice footrest. You don't kick that thing everyday going out the door? ;D Nice to see your getting ready. Check out my pics this morning for some "southern Fluke" ;D

Re: Got some work done today!
 

Nice footrest. You don't kick that thing everyday going out the door? ;D Nice to see your getting ready. Check out my pics this morning for some "southern Fluke" ;D

Re: Got some work done today!
 

come on mj get er done. oh and by the way with that tac tilted to the rite ,dosent that mean you'll go a lil faster ;D

Re: Got some work done today!
 

come on mj get er done. oh and by the way with that tac tilted to the rite ,dosent that mean you'll go a lil faster ;D

Re: Got some work done today!
 

I love that cover support. Gimmmiee one. ;D
great moring Pics. ;)

Re: Got some work done today!
 

I love that cover support. Gimmmiee one. ;D
great moring Pics. ;)

Re: Got some work done today!
 

It's coming MJ, launch day and flounder ;)

Re: Got some work done today!
 

It's coming MJ, launch day and flounder ;)

Re: Got some work done today!
 

You got the same Vents I put in several years back...and in same place...I wasn't losin' gas from them, but takin' in water :o ... turnin' port or starboard in rough water made a SCOOP outta them ::) ...


BTW...haven't seen a pic of you inna while...yer a lil' cuter than I remembered ;) :-* ...

Re: Got some work done today!
 

You got the same Vents I put in several years back...and in same place...I wasn't losin' gas from them, but takin' in water :o ... turnin' port or starboard in rough water made a SCOOP outta them ::) ...


BTW...haven't seen a pic of you inna while...yer a lil' cuter than I remembered ;) :-* ...

Re: Got some work done today!
 

Whata waiting for on that yammie. You gonna part it out, or put mulch around it and plant cute little flowers around it. ;D ;D
Might look like a grave marker. ;D

Re: Got some work done today!
 

Whata waiting for on that yammie. You gonna part it out, or put mulch around it and plant cute little flowers around it. ;D ;D
Might look like a grave marker. ;D

Re: Got some work done today!
 

It's his FOOT REST, for goodness' sake! Every Supervisor has to have one!

Lookin' good, MJ!

Re: Got some work done today!
 

It's his FOOT REST, for goodness' sake! Every Supervisor has to have one!

Lookin' good, MJ!

Re: Got some work done today!
 

LOL. ;D ;D

Re: Got some work done today!
 

LOL. ;D ;D

Re: Got some work done today!
 

Thanks guy's!!

Yes I have been lazy about getting the motor sold?? I was thinking of pulling the head off to see if there was a reason for the over heating (sand or something) Then I said no just get rid, then I will look to now it just sits there.

I am going to put on ebay!! I have the motor, oil tank, and wiring for it. I also have a Digital all in one Tac for a older Yamaha.

Gee I am sitting on some money here!! Were is the wrench!! :o

Re: Got some work done today!
 

Thanks guy's!!

Yes I have been lazy about getting the motor sold?? I was thinking of pulling the head off to see if there was a reason for the over heating (sand or something) Then I said no just get rid, then I will look to now it just sits there.

I am going to put on ebay!! I have the motor, oil tank, and wiring for it. I also have a Digital all in one Tac for a older Yamaha.

Gee I am sitting on some money here!! Were is the wrench!! :o

Re: Got some work done today!
 

I'm just glad to see him finally get some use out of that thing ::) :-/

MJ I really like that PVC frame you built. That is sweet!

Re: Got some work done today!
 

I'm just glad to see him finally get some use out of that thing ::) :-/

MJ I really like that PVC frame you built. That is sweet!