Puttin a lil Bling Bling on yo Veeeeeee
 

http://i36.photobucket.com/albums/e4...t/Props001.jpg

http://i36.photobucket.com/albums/e4...t/Props003.jpg

It was a little dark when I snapped em, but that my Merc Revolution 4 17p prop that will be mounted Tuesday with any luck at all.

Re: Puttin a lil Bling Bling on yo Veeeeeee
 

;D ;D ;D ;D ;D ;D

Re: Puttin a lil Bling Bling on yo Veeeeeee
 

As long as you don't bring CB out on your boat you be fine!!
He loves to chew up other peoples props >:(

Re: Puttin a lil Bling Bling on yo Veeeeeee
 

Ooooo!! ... purdy as a speckled pup!! 8) ...


Slot, my bud w/the Everglades went to a 4-blader w/ stern-lifting characteristics ... be interesting to see if this particular prop has any of the same, or if it was dialed in on his ... any thoughts of this :D ...


Hey...looky here ...

http://sites.mercurymarine.com/porta..._schema=PORTAL

it DO have some lift to it 8) ...

Re: Puttin a lil Bling Bling on yo Veeeeeee
 

I figure I've probably just made more work for myself. I've been thinking that I could run mine a hole higher, so I can probably run this one up 2 holes. Now where did I put that hoist? ;D

Re: Puttin a lil Bling Bling on yo Veeeeeee
 

(jack plate)

Re: Puttin a lil Bling Bling on yo Veeeeeee
 

I like it. ;D
I'll be over Tuesday night with a wrench. ;D ;D ;D

Re: Puttin a lil Bling Bling on yo Veeeeeee
 

:o Hide the donuts!!... :o ...

Re: Puttin a lil Bling Bling on yo Veeeeeee
 

I wouldn't move it til after ya run it ;) ...

Re: Puttin a lil Bling Bling on yo Veeeeeee
 

Well, after working about a million hours over the weekend, my brain is fried. The good news? Tomorrow at Sunrise I'm going east, way, way, way, way, way east ;D

Re: Puttin a lil Bling Bling on yo Veeeeeee
 

Sounds like out where da BIG FISH play ;) 8) 8) ...Ketchum up, Slot ... you deserve a good trip... ;) ;D ...

Re: Puttin a lil Bling Bling on yo Veeeeeee
 

Just got home...gettin set to go load everything up for sunrise launch. Camera is already in boat ::)

After looking at this prop, it has massive blade area. Can't wait to see results. Full report coming tomorrow night or the next morning ;)

Weather forecast calling for no seas, wind 5mph :D

Re: Puttin a lil Bling Bling on yo Veeeeeee
 

"But did he ever return?
No he never returned,
but his fate was plain to see..."
;D ;D ;D ;D ;D ;D ;D ;D ...

Re: Puttin a lil Bling Bling on yo Veeeeeee
 

AIR........ PICS BRO ;D ;D ;D ;D

Re: Puttin a lil Bling Bling on yo Veeeeeee
 

I've returned...posted fishing report with obligatory pics. Confirmed one of my suspicions...got to raide the motor for optimum performance. She still turns 5400 -5500 just as she did with the old prop. I can't make her break loose trimmed up, even turning, so she's runnin too deep. Overall I was very happy with new prop. Feeshin was good too ;D

Re: Puttin a lil Bling Bling on yo Veeeeeee
 

I also run a four blade prop on my 150 merc. Why do you feel you need to raise your motor? One advantage I see is it won't cavitate when turning. I'm still turning good rpm's, better hole shot and on plane faster. I'm running 44.7 mph on gps and very happy with that number. You won't get a higher top end with a four blade prop as opposed to a three blade. What's your top end? Am I missing something?

Re: Puttin a lil Bling Bling on yo Veeeeeee
 

Optimum motor height will give best mileage. If I can run 1.5" less gearcasr through the water, thats alot less drag.

Re: Puttin a lil Bling Bling on yo Veeeeeee
 

Slot, I checked your gallery and you have a 20" transom (standard for 87 was 25"). Your boat may have been a special order. My 86 is 25" and I know the four blade helped my performance alot.

Re: Puttin a lil Bling Bling on yo Veeeeeee
 

Seacrets, is your motor mounted in the bottom holes? Mine is mounted as low as she'll go.

Re: Puttin a lil Bling Bling on yo Veeeeeee
 

Won't be near the boat till next weekend. I'll check it out and get back to you.