Wellcraft V20 Community

Wellcraft V20 Community (https://forums.wmpdevserver1.com/community/index.php)
-   General (https://forums.wmpdevserver1.com/community/forumdisplay.php?f=10)
-   -   about that ebay motor (https://forums.wmpdevserver1.com/community/showthread.php?t=2757)

macojoe 09-05-2007 09:49 AM

about that ebay motor
 
I might try biding on that ebay motor, But it it a looper like the one I have??
I don't want the cross flow!

http://cgi.ebay.com/ebaymotors/ws/eB...m=160152473538

Blue_Runner 09-05-2007 11:15 AM

Re: about that ebay motor
 
You sure you want to roll the dice on shipping? I hate to dig up old bones but I can't help but remember that last shipping debacle that you and I went through! Lost, then found, then lost, then found, then lost, then found, then lost, then still lost, then still lost, then found...then damaged....missing parts etc. etc. etc.

I guess just make sure they crate it up better than I did and try to get some good shipping insurance. I wouldn't do it without those 2 things.

Good luck!

Blue



macojoe 09-05-2007 11:28 AM

Re: about that ebay motor
 
I have to hope that, that was not the norm in shipping!!

Tunahead sent me a nice shipping site were you can ck the drivers that bid on your shipment
Much like ebay feed back, if they look good go for it, if a driver has bad feed back you can deny them.

So I will take another chance.

But is that a looper?? Like the one I have?? I can get it and keep mine for parts ;)

C YENSEN 09-05-2007 11:54 AM

Re: about that ebay motor
 
SOUNDS A LITTLE SCARY TO ME :-/

Blue_Runner 09-05-2007 12:06 PM

Re: about that ebay motor
 
Quote:

Tunahead sent me a nice shipping site were you can ck the drivers that bid on your shipment
Much like ebay feed back, if they look good go for it, if a driver has bad feed back you can deny them.
Well, that does sound much better. I wish we'd known about that ::) I don't know on the looper/crossflow question.

reelapeelin 09-05-2007 12:18 PM

Re: about that ebay motor
 
Here's what Ferm said about that motor:

Your 86 150 is the same basic engine that MJ has on his V-20, old school cross-flow engine. They are thirsty gas hogs for there output. That 86 225 is a good engine on fuel. It's a small-bore looper. The later 200/225's burned more fuel than the 86-87's small-bore's. The 88-91 large-bore loopers aren't that bad on fuel, but the 93+ are known to burn more. The later engines are more reliable, but I like my early small-bore looper. I've actually been eyein that engine myself. I like small-bore engines, LOT's of potential to build some HP

THEFERMANATOR 09-05-2007 12:57 PM

Re: about that ebay motor
 
YES, she is definately a looper MJ. In fact it is the same looper you have now. 86-87 were basically the same engines. Have at her MJ, I need another engine right now like I need another boat :-[. And if your really froggy about her, I'll send you the article on how to make 300HP out of her reliably.

Mulv80 09-05-2007 01:25 PM

Re: about that ebay motor
 
I will never buy a used motor from Florida. The boating season down there is year round resulting in alot more hours compared to the NE. Also that motor looks like it was painted, I like to see the original condition of everything so I can tell how the previous owner took care of it. When I see new paint I think lipstick on a pig. I think you can find better locally.

macojoe 09-05-2007 01:27 PM

Re: about that ebay motor
 
Great I will be watching her this afternoon!!

Now I need another loan! I will have nothing at this rate when I sell the V, If it sells??

Thanks!!

Hammerhead 09-05-2007 01:59 PM

Re: about that ebay motor
 
MJ...If that's the motor in Port St. Lucie I can check it out for ya before they ship...and take some pics to make sure everything's in order. Good luck if ya bid.


macojoe 09-05-2007 02:04 PM

Re: about that ebay motor
 
Thanks HH I just sent the guy a email asking right were he is.
Says Miami??

macojoe 09-05-2007 02:16 PM

Re: about that ebay motor
 
Hammerhead he just replyed

Dear universalmaco0,

We are in Kendall, 20 miles southwest of miam

THEFERMANATOR 09-05-2007 02:26 PM

Re: about that ebay motor
 
Our boating season is pretty much year round down here, but what alot of people don't think about is things rot from sitting not working. There are alot of engines down here that get used day in and day out still in good shape because they get used. Another thing to consider is where that engine is isn't far from LAKE OKECHOBEE. There are still quite a few people that have good sized boats on the big pond. I got my MERCURY from down there, it there isn't the first sign of it haveing ever been in saltwater before I got it.

The engine in the auction has seen salt, no doubt. But look at the pic of the steering arm, it appears to have little to no pitting on it. And the clamp bracket only shows some minor corrosion around the tilt tube. I would like to see some better pictures of the whole engine myself, but of what's visible shows good.

msbhammer 09-05-2007 02:40 PM

Re: about that ebay motor
 
Wow, thats a clean lookin motor there and at a nice price. The shipping cost will suck though. :-/

parishht 09-05-2007 02:44 PM

Re: about that ebay motor
 
It does look good, but like HAMMER said Shipping cost,

I'll bet we could arrange a train to meet each other
and transfer the motor up to MJ.
I have easy access to the I-95 and I-81 corridors.

macojoe 09-05-2007 03:14 PM

Re: about that ebay motor
 
$500 to get shipped, I have checkesd all ready, got one bid for $450

I agree Therm, motors are ment to run and alot of stuff up this way goes bad cause they sit 8 months of the year!!

The train to MJ sounds great!!

But lets see if i get it?? I am calling in some markers right now :-/

macojoe 09-05-2007 04:48 PM

Re: about that ebay motor
 
Dear universalmaco0,

I've owned it for the last 10 years. I am the second owner. It's never overheated as long as I've owned it. When I bought it, it had 160 hours on the clock. As far as present hours, I don't think I put 25 hours a year on it since I got it. I would estimate around 400 hours.


tsubaki 09-05-2007 05:41 PM

Re: about that ebay motor
 
Allright less than two hours.
You gonna crap or get off the pot?
;D ;D ;D
(and a poot don't count)

macojoe 09-05-2007 06:44 PM

Re: about that ebay motor
 
Thats 53 min mister and I am watching!!

macojoe 09-05-2007 07:12 PM

Re: about that ebay motor
 
Quote:

Blue_Runner
God





Lexington, North Carolina




Posts: 4161
Re: about that ebay motor
« Reply #1 on: Today at 9:15am » Quote Modify

--------------------------------------------------------------------------------
You sure you want to roll the dice on shipping? I hate to dig up old bones but I can't help but remember that last shipping debacle that you and I went through! Lost, then found, then lost, then found, then lost, then found, then lost, then still lost, then still lost, then found...then damaged....missing parts etc. etc. etc.

I guess just make sure they crate it up better than I did and try to get some good shipping insurance. I wouldn't do it without those 2 things.

Good luck!

Blue
Yep all that and it didn't work :(
Hmm................Maybe it will work this time??

macojoe 09-05-2007 07:12 PM

Re: about that ebay motor
 
25 min!

macojoe 09-05-2007 07:30 PM

Re: about that ebay motor
 
7 min

macojoe 09-05-2007 07:43 PM

Re: about that ebay motor
 
I won the motor!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! ;D

Franco 09-05-2007 07:45 PM

Re: about that ebay motor
 
Congratulations MJ,


Blue_Runner 09-05-2007 09:59 PM

Re: about that ebay motor
 
Quote:

Yep all that and it didn't work
One thing is for sure, I don't see how this one could go any worse!

I think it will work out for you! And wow - can't beat the price! Seller sounds and looks reputable.

Best of luck, we'll all be watching!

Blue

Pipe_Dream 09-06-2007 09:52 AM

Re: about that ebay motor
 
Way to go, MJ! *Pretty close timing on that bid, I'd say. *

THEFERMANATOR 09-06-2007 02:19 PM

Re: about that ebay motor
 
Quote:

Originally Posted by Pipe_Dream
Way to go, MJ! *Pretty close timing on that bid, I'd say. *

So what did ya really say there pipe, I see the FORUM ADMIN edit?

macojoe 09-06-2007 02:47 PM

Re: about that ebay motor
 
He was making sexual advances to me :-*

Pipe_Dream 09-06-2007 03:39 PM

Re: about that ebay motor
 
Quote:

Originally Posted by THEFERMANATOR
So what did ya really say there pipe, I see the FORUM ADMIN edit?

I'll never tell. ;)

kamikaze 09-11-2007 10:08 PM

Re: about that ebay motor
 
Therm:

Where's that article to make that baby crank out 300 poines. Inquiring minds want to know!


Kamikaze



THEFERMANATOR 09-11-2007 11:44 PM

Re: about that ebay motor
 
Quote:

Originally Posted by kamikaze
Therm:

Where's that article to make that baby crank out 300 poines. *Inquiring minds want to know!


Kamikaze


Check the performance forum.

macojoe 09-12-2007 01:20 AM

Re: about that ebay motor
 
I be happy if it gets here and runs!! NOw its stuck 1/2 way :'(

msbhammer 09-12-2007 01:51 AM

Re: about that ebay motor
 
Yeah, it's stuck in Delaware. In my driveway. ;D ;D ;D

bigshrimpin 09-12-2007 04:08 AM

Re: about that ebay motor
 
MJ - Not Again!!! I hope you bought insurance this time :)

macojoe 09-12-2007 08:26 AM

Re: about that ebay motor
 
Look what the cat draged in!!

C YENSEN 09-12-2007 09:22 AM

Re: about that ebay motor
 
WHO IS BIGSHRIMPIN???

NEVER HEARD OF HIM. ::) ;D

GLAD TO SEE YOU AROUND ;)

macojoe 09-12-2007 11:19 AM

Re: about that ebay motor
 
I am going to call you today!!!!!!!!!!!You better answer!!!!!!!!!!!! :o

Blue_Runner 09-12-2007 12:38 PM

Re: about that ebay motor
 
While both of you are here - would one of you two please look into why the site is slow sometimes? Willy has given up on posting because of all the problems. I don't want to see any more leave.

Sorry for the hijack but you don't see both admins in one place all that often ;)

msbhammer 09-12-2007 12:58 PM

Re: about that ebay motor
 
Damm, We need Willy back. :'(

macojoe 09-12-2007 01:58 PM

Re: about that ebay motor
 
Quote:

While both of you are here - would one of you two please look into why the site is slow sometimes? Willy has given up on posting because of all the problems. I don't want to see any more leave.

Sorry for the hijack but you don't see both admins in one place all that often
You still don't!! He was here at 2am >:(


All times are GMT -5. The time now is 01:00 PM.

Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.