open for comments - V20 - 225 Honda
 

I bought my 1988 V20 fisherman center console about 8 months ago. It came with a 2004 Honda 225hp motor. The prop is a SS FOUR blade 14 1/4" by 17. Wide open it goes 44mph (GPS) and is turning at 5500 rpm. Seems to me that it should do better than that. Get about 3 mpg.
Any comments or tips would be appreciated.
thanks

Re: open for comments - V20 - 225 Honda
 

there are a couple of members that have 200's on their boats and get close to 50mph, I've got a 150 and can get near 40 out of it w/ a stock 3 blade aluminium 15x17, you SHOULD be doing better than 44 w/ a 225. There are a couple of good links about props in the link section...or you can ask for some input from our resident propmaster REELAPEELIN....he seems to be pretty much in the know about propellers, and he's got a Honda too. Good luck

Re: open for comments - V20 - 225 Honda
 

Silly question, but are you sure your GPS is set for MPH and not KTS??? 44 kts is a hair over 50mph. I top out at 49mph with 200 Merc with a t-top.

Re: open for comments - V20 - 225 Honda
 

Thanks, Phester...but I'm not really a prop expert...I just read V-20.com ;)...

Jackman, 44 does sound low, but the 5500 is more of an indicator to me that it's prop'd wrong...my 150 tops out at 42 mph at 6000 rpms...

what's the Honda's max rpm rating on the 225?...to ''get it all'', that's what to shoot for and your top speed will result...

Try these guys;

http://www.ptprop.com/

They make props FOR Honda and they'll evaluate your set-up and tell ya what ya need ;) ...

Re: open for comments - V20 - 225 Honda
 

MOst 150's will twist a 17p prop to about 5500 rpm's on a v-20. That Honda should be rated to turn about 5000-6000 and you want to shoot for the top of that range.. Something seems askew because w/ a 225 you should be turning that 17p prop closer to 6400 I'd guess. A 225 should spin a 21p on a v-20.

Airslot

Re: open for comments - V20 - 225 Honda
 

Right off the bat, aren't those 4 blade props slower on top end to begin with? I think they are made for holeshot.

I wonder what a 3 blade with a larger diameter, say 15 x 17 would do? :-/ ??? I think the pitch of 17 is fine.

Re: open for comments - V20 - 225 Honda
 

yeah BR they cut top end and help get good bite in rough seas go to a 3 blade would be a better option

Re: open for comments - V20 - 225 Honda
 

ok looked it up and it says that 4 blade props are as follows
for Super Holeshots & Handling Props (Reduce Pitch 1-2") - 4 Blade

Supercupped For Extreme Motor Elevation (Reduce Pitch 3-4") - 4 Blade

I'd say you needed the same prop in a 15 pitch or just get what BR said get a 15 x 17 prop stainless

Re: open for comments - V20 - 225 Honda
 

is this boat for sale?

thanks

Re: open for comments - V20 - 225 Honda
 

Sorry - my boat is NOT for sale.

Re: open for comments - V20 - 225 Honda
 

I called the guys at http://www.ptprop.com/.
Talked to a Bill L.
He took all my info and said something about a 8% slip, and said that's not bad. He recommended I keep the prop I have.

The 44 mph reading from my GPS is in MPH not knots - thanks for bringing that point up though - I have been known to to do silly things like that.

Re: open for comments - V20 - 225 Honda
 

jackman, that's surprising...that's a LOT more HP for only 2 more mph than my Honda 150...did PT ask or talk about max rpms from Honda?...

Re: open for comments - V20 - 225 Honda
 

reelapeelin,
At first he said I had the wrong prop.
He said the big Hondas like big diameter props, and that I should probably go to a 15 or 15 1/4 " prop. Then he said the pitch would have to be reduced to 15 degrees - he said I probably wouldn't like it because the top speed would go down to about 40mph. Then he did some calculations and said I was getting only 8 % slip, and that I would be ok with the prop I have. He did say that prop was great in rough seas. I was out 2 weeks ago at Key Largo and was trolling in 5' seas - the boat and motor were great.

Re: open for comments - V20 - 225 Honda
 

I'm sorry, but you should be running much better than 44 mph. I have a 150 Merc and I turn a 14 1/2 x 17" pitch and I run 42 mph. I run a four blade prop and I may lose 1-2 mph but I come out of the hole faster than a three blade prop.

Re: open for comments - V20 - 225 Honda
 

Jackman, i don't doubt anything you've said, but SOMETHIN' just ain't addin' up...that motor oughtta be in hi 40s ;) ...

Re: open for comments - V20 - 225 Honda
 

I agree with you 100%. I took the motor in for 2 recalls. The mech said he noticed something (in the engine) that was keeping the engine from going to full throttle. I will have to talk to him and find out exactly what that was all about. Now that I think of it, when I have the level at full throttle, it's very close to the glove box - maybe that is keeping the engine from going to full throttle. I will check into both things.
Thank y'all for your help!

Re: open for comments - V20 - 225 Honda
 

Good luck w/ it...let us know how she comes out ;) ...

Re: open for comments - V20 - 225 Honda
 

What does the 225 Honda weigh? I agree you should be toppin out more than that.

RAP, what does the 150 weigh?

Re: open for comments - V20 - 225 Honda
 

the Honda 225 weighs 610 pounds

Re: open for comments - V20 - 225 Honda
 

JM, do you have a t-top?

Re: open for comments - V20 - 225 Honda
 

yes - a SS one. Just got rid of it and am having an aluminum one made.

Re: open for comments - V20 - 225 Honda
 

Does anyone know where I can buy the Wellcraft name and logo - I am painting my boat and would like to know if there are stickers around.

Re: open for comments - V20 - 225 Honda
 

http://cgi.ebay.com/ebaymotors/WELLC...39077958QQrdZ1

Re: open for comments - V20 - 225 Honda
 

thanks TM
Just missed that one, but they have another one that I got to bid on.

Re: open for comments - V20 - 225 Honda
 

Hi Y'all,
Still waiting for my T-top to be finished. Tried to take out the pedestal seats - had trouble removing the screws that hold them down. One came out easily - the one near the side of the boat. The others were very hard to start - once I got them started, the just turned and did not come out - must be machine screws with nuts on the end. Sooo, how do I remove them? They go into a rectangular piece of the boat that looks like it might come out, but this piece goes under the console.
I am stumped on how to hold the nuts to get the screws out.
HELP !!
thanks,
Jack

Re: open for comments - V20 - 225 Honda
 

You can probably apply some pressure on the nuts by wedgeing a putty knife or screw driver between the pedastal and the deck. If no space you may have to drill the bolt heads off

Re: open for comments - V20 - 225 Honda
 

Airslot, you mentioned rpms. Being a new boater, what a good rpm cruising speed, if any. ?? Just off work and wanted to go for a quick ride in the Lewes canal, but have a major storm surging through Lewes right now. :'(
Thanks.

Re: open for comments - V20 - 225 Honda
 

Hammer, I cruise 42-4400 rpms...gets me around 30-32 mph...if I'm inna hurry, I'll set it close to 5Gs...the motor loves to run there, but she's a little thirstier, too :D ...

Re: open for comments - V20 - 225 Honda
 

Had to drill them. Got the pedestal out, but need to remove the remainder of the screws, and figure out how to reanchor the pedistal.
HELP !!!
thanks,
Jack

Re: open for comments - V20 - 225 Honda
 

Just drill the screws all the way out! *Then take a wooden dowel and dip in some resin and hammer into the hole, let dry cut off dowel and you aren done.

When mounting the new seat just turn and anchor in fresh holes between the old ones.

If you have small holes Golf T's work great for the same kind of repair!!

Use 5200 or 4200 under the seat to seal when you screw it down.

Re: open for comments - V20 - 225 Honda
 

Just figured out another way to solve the problem. Bought a round access panel, and cut out a circle in the floor between the 2 pedistal seats. No I can get my hand under there to put large washers and nuts on the screws to attach the pedistal. Problem solved!!!
I will take your advise to fix the old holes, and redrill them a short distance away from the old ones.
thanks,
Jack