|
finders fee
300 bucks to anyone who can tell me where i can find some used windshields for my v20 at a reasonable price. this is a serious offer. my boat is a 92 v20. windshields were produced by water bonett and the part number is 7284B. fabricator finaly got back to me *today. he said he could build them for me. it will only cost about 2400 bucks. almost worth the drive to florida just to slap that sucker in the mouth. again, this is a serious offer.
|
finders fee
300 bucks to anyone who can tell me where i can find some used windshields for my v20 at a reasonable price. this is a serious offer. my boat is a 92 v20. windshields were produced by water bonett and the part number is 7284B. fabricator finaly got back to me *today. he said he could build them for me. it will only cost about 2400 bucks. almost worth the drive to florida just to slap that sucker in the mouth. again, this is a serious offer.
|
Re: finders fee
first please get rid of the C--K word!!
I am sure if there was a place to get one some one would tell you for free!! Now I know water bonett is still in buissnes, but I hear they don't do windsheilds any more but they might be able to help?? If not, buy a junk V20 or other boat, take measure to have on hand anytime you see a boat that looks like it will fit. here is there site!! http://www.waterbonnet.com/ |
Re: finders fee
first please get rid of the C--K word!!
I am sure if there was a place to get one some one would tell you for free!! Now I know water bonett is still in buissnes, but I hear they don't do windsheilds any more but they might be able to help?? If not, buy a junk V20 or other boat, take measure to have on hand anytime you see a boat that looks like it will fit. here is there site!! http://www.waterbonnet.com/ |
Re: finders fee
i also sure that someone who knew would tell me for free bud. but if some one doesnt know, and would put thier own time into looking, it would only be fair to compensate them for thier time. and i am more than willing to do that.
|
Re: finders fee
i also sure that someone who knew would tell me for free bud. but if some one doesnt know, and would put thier own time into looking, it would only be fair to compensate them for thier time. and i am more than willing to do that.
|
Re: finders fee
I have a windshield off of a 1979 V20 Cuddy. The center glass is plexiglass but the rest of it is in good shape. Where are you located?
|
Re: finders fee
I have a windshield off of a 1979 V20 Cuddy. The center glass is plexiglass but the rest of it is in good shape. Where are you located?
|
Re: finders fee
I think I know where ther's one to be had. I'll let you know in the next day or two. 8)
|
Re: finders fee
I think I know where ther's one to be had. I'll let you know in the next day or two. 8)
|
Re: finders fee
sounds promising mulv, i live in gulfport, mississippi. my boat a 92. will need to take some measurements to make sure they will fit. dont too much care about glass, as long as frames are good. i need the whole set. CB, i will be anxiously awaiting ur next post. tx
|
Re: finders fee
sounds promising mulv, i live in gulfport, mississippi. my boat a 92. will need to take some measurements to make sure they will fit. dont too much care about glass, as long as frames are good. i need the whole set. CB, i will be anxiously awaiting ur next post. tx
|
Re: finders fee
Also tell me if the windshield is the same as a 80's V20 Cuddy. I see an old I/O V a few miles from me that has been sitting for years I can stop in and check if he wants to part it out.
|
Re: finders fee
Also tell me if the windshield is the same as a 80's V20 Cuddy. I see an old I/O V a few miles from me that has been sitting for years I can stop in and check if he wants to part it out.
|
Re: finders fee
that would be great willy. i will try to contact wellcraft and get some more info. if he is willing to part out check on the sliding hatch. i know someone here was asking about one. tx
|
Re: finders fee
that would be great willy. i will try to contact wellcraft and get some more info. if he is willing to part out check on the sliding hatch. i know someone here was asking about one. tx
|
Re: finders fee
also, willy, i need the plastic visor thingy that goes over the guages. and a hatch/ cover for the livewell amidships, if possible. if not i can make the hatch and i dont think that visor will keep me from catchin fish,lol. tx bud
|
Re: finders fee
also, willy, i need the plastic visor thingy that goes over the guages. and a hatch/ cover for the livewell amidships, if possible. if not i can make the hatch and i dont think that visor will keep me from catchin fish,lol. tx bud
|
Re: finders fee
Racerx, Have you tried www.flounderpoundermarine.com I beleive that is the site that some of our members have used for parts. also post on www.iboats.com and www.thehulltruth .com Crusher
|
Re: finders fee
Racerx, Have you tried www.flounderpoundermarine.com I beleive that is the site that some of our members have used for parts. also post on www.iboats.com and www.thehulltruth .com Crusher
|
Re: finders fee
I have been searching for a windshield also. Just lost my '89 in a storm on Cape Cod last week. 7 inches of rain , pump failed and 6-8 foot waves in a protected bay flipped her. Lost my 2001 150 Ficht, windshield, sliding hatch, fish box cover, etc. I am willing to work on the boat, but finding a windshield is key. Any help is much appreciated.
|
Re: finders fee
I have been searching for a windshield also. Just lost my '89 in a storm on Cape Cod last week. 7 inches of rain , pump failed and 6-8 foot waves in a protected bay flipped her. Lost my 2001 150 Ficht, windshield, sliding hatch, fish box cover, etc. I am willing to work on the boat, but finding a windshield is key. Any help is much appreciated.
|
Re: finders fee
Hey Boat, were you located?? I am in Yarmouth!
|
Re: finders fee
Hey Boat, were you located?? I am in Yarmouth!
|
Re: finders fee
Wish I knew who made it, but I've seen a kit-made windshield that looked GREAT and solid, too...be proud to have it on my boat anytime...comes w/ frame material and weather-strip in lengths that U cut and assemble, then have glass cut for size...I's really impressed w/ it... 8)...
|
Re: finders fee
Wish I knew who made it, but I've seen a kit-made windshield that looked GREAT and solid, too...be proud to have it on my boat anytime...comes w/ frame material and weather-strip in lengths that U cut and assemble, then have glass cut for size...I's really impressed w/ it... 8)...
|
Re: finders fee
Maco, I am in Barnstable Harbor
|
Re: finders fee
Maco, I am in Barnstable Harbor
|
Re: finders fee
Boat thats what I call Hell Harbor!!
Everytime that my boat has broken down, including my motor that just blew it has been in Barnstable!! >:( I have broken down there 6 times, the only times in 15 years boating!! I swore off that place and have not been there in 2 years, I said this year I give it a try for some Macks, But I told my buddy I hate going out of there! Sure anough, Momeriol Day I made it just past the sticks and the engin blew! >:( I will never never never go out of there again!! I will come around from Sesuit if I fewel the need to fish the Bay! Now your boat!! I am convinced! |
Re: finders fee
Boat thats what I call Hell Harbor!!
Everytime that my boat has broken down, including my motor that just blew it has been in Barnstable!! >:( I have broken down there 6 times, the only times in 15 years boating!! I swore off that place and have not been there in 2 years, I said this year I give it a try for some Macks, But I told my buddy I hate going out of there! Sure anough, Momeriol Day I made it just past the sticks and the engin blew! >:( I will never never never go out of there again!! I will come around from Sesuit if I fewel the need to fish the Bay! Now your boat!! I am convinced! |
Re: finders fee
it's the "Massachusettes Triangle" :-/
|
Re: finders fee
it's the "Massachusettes Triangle" :-/
|
Re: finders fee
Sorry about your V-20 Boatn. Seeing the bottom looking up at you is an awful feeling. :P
|
Re: finders fee
Sorry about your V-20 Boatn. Seeing the bottom looking up at you is an awful feeling. :P
|
Re: finders fee
|
Re: finders fee
|
Re: finders fee
tx paris, but no dice. close, if it were about 8 inches wider i could make it work. maybe i will here from Mulv, or Chumbucket, or willy soon. tx guys
|
Re: finders fee
tx paris, but no dice. close, if it were about 8 inches wider i could make it work. maybe i will here from Mulv, or Chumbucket, or willy soon. tx guys
|
Re: finders fee
Does this do ya any good..
http://www.iboats.com/boat-windshiel...#124;567037099 Click on flat glass... |
Re: finders fee
Does this do ya any good..
http://www.iboats.com/boat-windshiel...#124;567037099 Click on flat glass... |
| All times are GMT -5. The time now is 04:40 AM. |
Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.