Wellcraft V20 Community

Wellcraft V20 Community (https://forums.wmpdevserver1.com/community/index.php)
-   Classifieds (https://forums.wmpdevserver1.com/community/forumdisplay.php?f=21)
-   -   Mid-80's V-20 - $450 (https://forums.wmpdevserver1.com/community/showthread.php?t=16424)

ssiredfish 08-02-2011 01:07 PM

Mid-80's V-20 - $450
 
Pops needs this boat out of his yard!!!!! He bought it as a project boat but never got around to it. Like I said its a mid-80's V-20 with what looks like an early 90's 175Hp Evinrude that runs. Boat needs a good cleaning and is on a trailer but would have to be flatbedded home or rigged-up as one of the cross beams has dropped.

Askin $450 cause thats what he spent on gas and rigging to get it home from FLA.

I realize I don't have all the info or pics up but if you are interested I will get you whatever you need.......just tryin to help dad out.......

RWilson2526 08-02-2011 05:47 PM

shoot for that money cant imagine somebody wouldnt pick it up....

smkinnan 08-03-2011 11:30 AM

Quote:

Originally Posted by ssiredfish (Post 178013)
Pops needs this boat out of his yard!!!!! He bought it as a project boat but never got around to it. Like I said its a mid-80's V-20 with what looks like an early 90's 175Hp Evinrude that runs. Boat needs a good cleaning and is on a trailer but would have to be flatbedded home or rigged-up as one of the cross beams has dropped.

Askin $450 cause thats what he spent on gas and rigging to get it home from FLA.

I realize I don't have all the info or pics up but if you are interested I will get you whatever you need.......just tryin to help dad out.......

got any pics that you could send? I really need a trailer for my V badly. Do you know if it has brakes on it?

ssiredfish 08-04-2011 07:40 AM

Quote:

Originally Posted by smkinnan (Post 178078)
got any pics that you could send? I really need a trailer for my V badly. Do you know if it has brakes on it?

Unless you are a welder, you don't want this trailer. I mentioned it would have to be taken on a flatbed trailer or rigged some way. Part of the reason its only 450.

Curapa 08-04-2011 09:52 AM

Is is a CC?

reelapeelin 08-04-2011 10:09 AM

Check your PMs...

Kracker Jack 08-31-2011 05:23 PM

did it sell?

ssiredfish 09-01-2011 02:25 PM

Still for sale

And its a V20 so no CC

Pics available upon request

Bygracealone 09-01-2011 05:10 PM

Quote:

Originally Posted by ssiredfish (Post 179544)
Still for sale

And its a V20 so no CC

Pics available upon request

Can you post pics on the site? BTW, V20's were available as cuddies, center consoles, and dual consoles... that's why the question was asked...

Should sell, though... that's a great price...

Kracker Jack 09-20-2011 09:34 PM

im requesting a pic. How close are you to valdosta Ga.?

ssiredfish 09-21-2011 12:47 PM

5 Attachment(s)
About an hour or so from Valdosta, maybe 1.5hrs........

Attached are the pics of "Dad's V". Little moldy on the side but mine looked worse pre-pressure washer and cleaned up great. The floor in the back felt great, he mentioned he did some glassing back there, hatches nice and firm throughout. The front by the steering wheel was a little soft but he said that spot was easy to access and was next on the list. Other than that, she felt solid all around. Didnt hear any loose stringers or anything like that and he said that when he bought it the guy cranked the engine up for him. Hasn't been used since then though.....

The trailer.......This is what I meant when I said it would need some work to get it home. As I mentioned before that would be the hard part about gettin her home but its also one of the reasons its $450.......

If you have any other questions you can call my dad at 912-230-6973(Hal).

reelapeelin 09-22-2011 06:36 AM

Quote:

Originally Posted by ssiredfish (Post 180158)
About an hour or so from Valdosta, maybe 1.5hrs........

Attached are the pics of "Dad's V". Little moldy on the side but mine looked worse pre-pressure washer and cleaned up great. The floor in the back felt great, he mentioned he did some glassing back there, hatches nice and firm throughout. The front by the steering wheel was a little soft but he said that spot was easy to access and was next on the list. Other than that, she felt solid all around. Didnt hear any loose stringers or anything like that and he said that when he bought it the guy cranked the engine up for him. Hasn't been used since then though.....

The trailer.......This is what I meant when I said it would need some work to get it home. As I mentioned before that would be the hard part about gettin her home but its also one of the reasons its $450.......

If you have any other questions you can call my dad at 912-230-6973(Hal).


Check your email...

bradford 09-23-2011 08:00 PM

Quote:

Originally Posted by reelapeelin (Post 180178)
Check your email...


Umm Hmm......Somebody gettin a nuther project. You go Reel. :beer:

spareparts 09-24-2011 12:23 PM

I told ya'll Reels gonna have a fleet :sun:

bradford 10-07-2011 07:00 PM

So what's up Reel you git this one?

reelapeelin 10-08-2011 07:24 PM

Quote:

Originally Posted by bradford (Post 180712)
So what's up Reel you git this one?

Want to...we still talkin' about it...

reelapeelin 10-20-2011 08:09 AM

I have passed on getting this boat...not because of the boat or price or anything more than I've just got my hands FULL right now and can't take on another...somebody needs to get this...it's a project, no doubt, but lots of goodies here, too...as he suggests, take a trailer w/you to pick it up...

captrob10 10-20-2011 03:47 PM

Plz check ur pm's. Well, I think I sent u one. My phone isn't the best lol. Let me know if u got it thanks


All times are GMT -5. The time now is 03:06 AM.

Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.