![]() |
1986 Evinrude 150 complete with controls $500
I decided to buy the whole boat and I am selling a running 1986 evinrude 150hp with controls
also has an alumium prop for $500 also looking for trades http://members.cox.net/deshet/DSC02082.jpg http://members.cox.net/deshet/DSC02079.jpg |
Re: 1986 Evinrude 150 complete with controls $500
you had it in the water yet bud? if its not to late, you might aughta before you pull it. sometimes those things run great on the muffs, then when you put them in the water they fall flat on thier a$$. also, you can get a compression guage at autozone for about $15 remove all the plugs and open up the throttle wide open. check each cylinder with the guage by turning over with the key (make sure battery is fully charged) if it all checks good talk to macoejoe. this may be a better deal than the one he is looking at. if mj dont want it post that puppy on ebay, no reserve, and start the bidding at $500. if it all cheks out good you should get $800-$1000 for that motor! good luck.
|
Re: 1986 Evinrude 150 complete with controls $500
Any Pics. of the Motor ??? ??? ???
|
Re: 1986 Evinrude 150 complete with controls $500
pictures added
|
Re: 1986 Evinrude 150 complete with controls $500
OOPS, I missed them. Nice pics. and motor. what size shaft ?
|
Re: 1986 Evinrude 150 complete with controls $500
Looks like a 25" shaft mounted on a 20" transom cause that jackplate is all the way up.
Airslot |
Re: 1986 Evinrude 150 complete with controls $500
|
Re: 1986 Evinrude 150 complete with controls $500
Lets see the whole boat, the damaged transom, pictures of the cowling off. More, More, More. :o :o :o :o :o :o :o :o :o :o :o :o :o :o :o :o :o :o
|
Re: 1986 Evinrude 150 complete with controls $500
and some interior pics of the cockpit. few more things i might need if she got 'em. tx
|
Re: 1986 Evinrude 150 complete with controls $500
deshet..i need that jackplate ;D
|
Re: 1986 Evinrude 150 complete with controls $500
Deshet:
How about a pic with the engine cowling off so I can see what shape the powerhead is in? Thanks Kamikaze |
Re: 1986 Evinrude 150 complete with controls $500
more engine picture
http://members.cox.net/deshet/Picture%20001.jpg http://members.cox.net/deshet/Picture%20003.jpg http://members.cox.net/deshet/Picture%20005.jpg http://members.cox.net/deshet/Picture%20007.jpg make some offers or some trades. I need a GPS I would like a go cart for my kids |
Re: 1986 Evinrude 150 complete with controls $500
how much ya want for the jackplate deshet?
|
Re: 1986 Evinrude 150 complete with controls $500
That's some fancy wiring and placement of those solenoids. :D Works though. ;)
|
Re: 1986 Evinrude 150 complete with controls $500
Deshet:
Check your PM Kamikaze |
Re: 1986 Evinrude 150 complete with controls $500
Quote:
;) ... |
Re: 1986 Evinrude 150 complete with controls $500
Damm, I just got rid of my kids go cart. Paid $1500.00 for it 8 years ago. Always stored inside. Sold it for $150.00. She might have rode it a dozen times. :'(
Spolied Kids I have ;D |
Re: 1986 Evinrude 150 complete with controls $500
Need some to come get this motor boat is going to the dump this week
|
Re: 1986 Evinrude 150 complete with controls $500
Better make a stand fast!! Or you can give it to me free and I will make a stand!! ;) ;D
|
Re: 1986 Evinrude 150 complete with controls $500
did you get with lesterus? he needed some misc. stuff. sliding bow hatch, gastank hatch, etc...
|
Re: 1986 Evinrude 150 complete with controls $500
you gonna throw the motor in the trash?
|
Re: 1986 Evinrude 150 complete with controls $500
I had the motor running on Tuesday out on the water (Elizabeth River) and she ran great with no problems and shifted correctly.
Looking for a decent offer. |
Re: 1986 Evinrude 150 complete with controls $500
I will give you $50, you deliver to cape cod, I take you out on my boat. ;D
|
Re: 1986 Evinrude 150 complete with controls $500
Deshet:
Never heard back from you? Kamikaze |
| All times are GMT -5. The time now is 02:03 AM. |
Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.