Wellcraft V20 Community

Wellcraft V20 Community (https://forums.wmpdevserver1.com/community/index.php)
-   Boats For Sale or Wanted (https://forums.wmpdevserver1.com/community/forumdisplay.php?f=8)
-   -   My Force's Value (https://forums.wmpdevserver1.com/community/showthread.php?t=1533)

Mac_Attack 12-24-2006 01:45 AM

My Force's Value
 
Now MJ don't tell me you wouldn't even use it for an anchor. *What would the value be for a 1990 150HP Force with controls and gages? *It runs good and can be water tested. *Bily Mac *;D

chumbucket 12-24-2006 01:54 AM

Re: My Force's Value
 
According to NADA (nadaguides.com);

http://nadaguides.com/Values/ValueRe...el=17000800179

If it runs as well as you say it does, probably as much as $1000. ??? Probably somewhere in between would be my guess.

Whatcha thinking about Billy MAC?

Mac_Attack 12-24-2006 02:03 AM

Re: My Force's Value
 
150 etec ;D

Mac_Attack 12-24-2006 02:06 AM

Re: My Force's Value
 
I was hoping around $1000. AT $450 I'd be better to part it out but don't want the hassle or storage problem. Billy Mac ;D

chumbucket 12-24-2006 02:10 AM

Re: My Force's Value
 
Well. If you read down the bottom of that NADA page, it states, "Outboard Motors in exceptional condition can be worth a significantly higher value than the Average Retail Price shown."
And, since yours includes controls and gauges, go for it brudda. ;) 8)

Kajun 12-24-2006 03:03 AM

Re: My Force's Value
 
mac..i've been watching forces on ebay for over a year....a running force with gauges and controls on ebay would prob go from anywhere $700-1200+...depending what season...winter on low end...spring is when you want to put it up for sale.

reelapeelin 12-24-2006 10:32 AM

Re: My Force's Value
 
Plus the fact that yours is a ''freshwater only'' motor, should enhance the value even more ... go for it, Mac ...that E's gonna be SAWEET !! 8) !! ... heck, if you're talkin' to the right dealer, he might allow you that much trade-in value??...who knows...won't hurt to ask ... ;) ...

TheTinMan 12-24-2006 12:43 PM

Re: My Force's Value
 
Mac, while the 150 is definatley enough, I'd seriously consider the 175 or even the 200. They are all the same bock and weight (427 lbs.) I don't care about the extra top end too much but crusing the same speed at lower RPM's woud be nice...should be even better economy and less strain on the motor, better resale if that time ever comes too. Did you know E-TECS are self winterizing?! Cool feature.

phester 12-24-2006 01:15 PM

Re: My Force's Value
 
self winterizing? How does that work?

TheTinMan 12-24-2006 01:26 PM

Re: My Force's Value
 
Quote:

Originally Posted by phester
self winterizing? How does that work?

When the Auto-Winterization feature is activated, the EMM rapidly cycles the oil injector to "fogs" the engine. When the winterize cycle is complete (about 1 minute), it will automatically shut the engine off. Once the engine has turned off, turn off the key switch (if equipped), remove the engine from the water or from the flushing device and allow the water to drain from the engine. Your Evinrude E-TEC is ready to be placed into storage. The only additional item we recommend is to remove the propeller and inspect the propshaft and seal to ensure there is no fishing line wrapped around it.

Mac_Attack 12-24-2006 01:48 PM

Re: My Force's Value
 
While I was out of work this summer I went to my local Evinrude dealer to get a E-Tec brochure. *He was installing a 90 HP etec. *He asked if I'd like to see and hear it run when the install was complete. *He called I went I was sold on the etec. *I'm thinking about the 175Hp but I'm pushing the envelope now at the 150 we will see. *Boat show is coming in February deals can be made. *I'm excited. ;D ;D ;D *Billy Mac

I'm not against speed but I'd prefer to be the old bull and walk down the hill. *I'd like to see if there is a savings at lower Rs vs displacement.

sfprovyn 12-24-2006 08:46 PM

Re: My Force's Value
 
Put that Force on ebay..you will be suprised how much you can get for it...Frank

reelapeelin 12-24-2006 11:22 PM

Re: My Force's Value
 
Quote:

Originally Posted by sfprovyn
Put that Force on ebay..you will be suprised how much you can get for it...Frank



Great idea!!... ;) ;D ...

Kajun 12-25-2006 10:16 PM

Re: My Force's Value
 
now thats funny lol.....



Mac check this one out... its at $1025 now http://cgi.ebay.com/ebaymotors/ws/eB...m=330063585309

macojoe 12-26-2006 12:46 AM

Re: My Force's Value
 
Quote:

Now MJ don't tell me you wouldn't even use it for an anchor
Wow he knows me well!! ;) ;D

I don't know Mac, with all the problems I had this year with motors, I might have just hung a Force to get some fishing done??

Ebay is the deal!! Lots of stupid people there willing to spend a ton of cash on junk!! (not picking on you!!) just stuff in general!

Give it a shot!! if it doesn't sell then part it out either way you will get something for it.

Here I start I will give you $1 and I will use for a mooring ;) ;D

sfprovyn 12-27-2006 01:44 AM

Re: My Force's Value
 
A friend of mine pitch poled his 2001 19 Proline center console in Beaufort inlet on the 4th of july . The boat did not sink but killed the 150 merc , fried all the wiring and electroncs etc. I bought the T Top for my Mako 17 along with some mackeral bags, downriggers etc so all he had left was a trailer with a hull and dead motor on it which he sold sunday night on Ebay for $4,571 dollars ...A while back I saw a guy sell 5 old Rapala CD 22's that were all bitten up from catching barracuda for more than you can buy new ones for...When you list it put a reserve on it so you got nothing to loose...Frank


All times are GMT -5. The time now is 06:04 AM.

Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.