Wellcraft V20 Community

Wellcraft V20 Community (https://forums.wmpdevserver1.com/community/index.php)
-   Performance (https://forums.wmpdevserver1.com/community/forumdisplay.php?f=15)
-   -   Opinion on '94 Johnson Ocean Runner 175 (https://forums.wmpdevserver1.com/community/showthread.php?t=12531)

reyb 08-07-2009 08:39 PM

Opinion on '94 Johnson Ocean Runner 175
 
Any one have any experience with this motor? It supposedly has around 300 hours and is priced at $2750

Thanks,

Rey

THEFERMANATOR 08-07-2009 09:47 PM

Price seems high, but argueably one of the best engines that OMC EVER built. The 150/175 loopers from 91+ have proven themselves time and time again to just run, but they do like there gas burning about the same as most 200's.

cterrebonne 08-07-2009 10:21 PM

my uncle just bought a 97 for 2400. that engine might have had 50 hours max. cleanest one i have seen in a while. you might be able to get them to know 500 off.

reyb 08-09-2009 11:23 AM

Thanks for the info Ferm/cterr.

Rey

Stillrunning 08-10-2009 02:31 PM

I had a 1994 150 on my V and it was a great motor. I think over 12 years I put maybe $800 into the motor and alot of that was for a carb job. The motor was purchased new in 1996 and still ran like new when I sold it a few months back.

cterrebonne 08-10-2009 04:59 PM

Quote:

Originally Posted by Stillrunning (Post 145959)
I had a 1994 150 on my V and it was a great motor. I think over 12 years I put maybe $800 into the motor and alot of that was for a carb job. The motor was purchased new in 1996 and still ran like new when I sold it a few months back.

also the carbs are east to work on so if you are mech inlc. you can do that yourself.

reyb 08-11-2009 10:23 AM

UPDATE: Nevermind. For some reason I always thought my transom was 25" but I was just told that it's 20". The Johnson OceanRunner is a 25". Wow, do I feel stupid :)


Man, still doing research.... Anyone know what the compression should be on this
'94 Johnson 175 OceanRunner? What else should I look for when checking out the motor? The guy that bought my BlackMax hooked a volt meter before and after starting to see what charging is going on. Also, did the big screwdriver to engine to ear to listen for knocking. Checked the oil in the gear case. Checked spark plugs. What else is there?

Thanks,

Rey

MIKETTURBO 08-11-2009 09:37 PM

94 175 ocean runner on my V & I love it.lots of power 40 mph.ss prop.i have a replacment stator if u need one.brand new.

reelapeelin 08-12-2009 08:34 AM

Quote:

Originally Posted by reyb (Post 146034)
UPDATE: Nevermind. For some reason I always thought my transom was 25" but I was just told that it's 20". The Johnson OceanRunner is a 25". Wow, do I feel stupid :)


Man, still doing research.... Anyone know what the compression should be on this
'94 Johnson 175 OceanRunner? What else should I look for when checking out the motor? The guy that bought my BlackMax hooked a volt meter before and after starting to see what charging is going on. Also, did the big screwdriver to engine to ear to listen for knocking. Checked the oil in the gear case. Checked spark plugs. What else is there?

Thanks,

Rey


The big screwdriver to the engine block while running was listening to the main crankshaft bearings...amazing how sound travels through a screwdriver, but you can hear smooth vs rough quite distinctly...you gotta know where the bearings are and put the tip on the block in the right places...

reyb 08-13-2009 11:37 AM

Checked out the motor this motor. 2 cylinders has around 87psi while the other 4 have 100psi...what your opinion on this?

Thanks,

Rey


All times are GMT -5. The time now is 05:21 PM.

Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.