|
Re: 21 Project Part 2 The Finish is Coming
lol Reel this stuff is great too. but the epoxy i used wasn't to cheap it's $20 for the small 2 part kit
http://www.kbs-coatings.com/KBS-Gold...W{u8o7uKt6RSUg I'm going to ask $9500 for it. *what do you guys think? Do you think it will sell ??? I told the neighbor i was bringing it so he said he would have the fuel flow reader and radar gun plus GPS to get the numbers on the old girl, he ask which prop i had and it currently has a Stelleto 14.5 X 19 he said i will need a 15 X 21 for my hull he is the best prop guy i've ever seen, he can look at a hull and the motors HP and tell you the exact prop you need. He said with the 19 pitch it should run 60 mph but with a 21 should run 65 |
Re: 21 Project Part 2 The Finish is Coming
$9500 ain't bad at all!! :D ...you got it onna good trailer and goodness knows it's been done RIGHT ;) 8) ... If I was in the market, I come get it ;D ...
|
Re: 21 Project Part 2 The Finish is Coming
If I was in the Market??
I am always in the market just have no cash :'( The thing here is not that it isn't a good price (cause it is) Its just finding the right guy that knows what he is looking at and can appreciate what has gone into it to get it to were it is!! Have a pic album showing the work in different stages on hand when they come look. And of coarse you can answer anything they come up with!! The right guy will show!! |
Re: 21 Project Part 2 The Finish is Coming
well thanks guys, Well sorry no pics but lastseveral days i've been getting her USCG ready Fire Ext, Oar, Throwable, mounted all seats, tank back in hull, fuel/water seperator installed, all hatch's installed.
|
Re: 21 Project Part 2 The Finish is Coming
pics, pics, pics, or Hammer will come and get you ::)
|
Re: 21 Project Part 2 The Finish is Coming
Hmmm let's see.....new boat for $9500 - I think somebody's gonna get a hell of a deal IMO!!
I don't think you'll have much trouble selling skools ;) |
Re: 21 Project Part 2 The Finish is Coming
Sweet, you do great work,
One question, is it safe to have the fuel line running on top of the battery right at the terminal? http://i52.photobucket.com/albums/g1...lsfuelline.jpg |
Re: 21 Project Part 2 The Finish is Coming
no issues there, alot of smaller I/O's have fuel tank, motor, battery, and all in one compartment.
|
Re: 21 Project Part 2 The Finish is Coming
Thss getting better then the wet thread!!
Thast new guy should look at this!! |
Re: 21 Project Part 2 The Finish is Coming
That'd make a helluva big-lake striper boat 8) ...add FF, troll-motor, rod-holders and bait-tank ... 8) 8) ...
|
Re: 21 Project Part 2 The Finish is Coming
Quote:
Anyway, looking really nice buddy. As somebody already said, someone's gonna get a great deal in buying that boat AND trailer. |
Re: 21 Project Part 2 The Finish is Coming
lol oh well it's not as it looks thats an illusion
|
Re: 21 Project Part 2 The Finish is Coming
well guys i towed her around town and some highway this afternoon and tonight to test the brakes and to ensure the tires and bearings didn't get hott. All was good and working perfect. towed great stopped great that Gas Tahoe doesn't man handle the boat as well as my diesel one does but it does well. tomorrow is the big 3.5 hour trip to the coast for her first return since i picked her up on Front St. Beaufort NC 5 years ago.
|
Re: 21 Project Part 2 The Finish is Coming
Good Luck, we will be awaiting the report!!
|
Re: 21 Project Part 2 The Finish is Coming
Quote:
...complete w/pix!! 8) ...and NUMBAS ;) ... |
Re: 21 Project Part 2 The Finish is Coming
well i started the motor tonight and she runs good but fouling plugs due to lots of break in oil but will burn out soon i hope and run great but running like a new one for a while, it currently is multi colored will get pics tomorrow for ya
Quote:
|
Re: 21 Project Part 2 The Finish is Coming
here she is in completed form see her now soon it will be painted white and decaled as Johnson
http://i8.photobucket.com/albums/a46...MVC-001S-3.jpg http://i8.photobucket.com/albums/a46...MVC-002S-3.jpg http://i8.photobucket.com/albums/a46...MVC-003S-3.jpg |
Re: 21 Project Part 2 The Finish is Coming
Nice - you motor Ho *;D
|
Re: 21 Project Part 2 The Finish is Coming
Skool,
Do you use the same primer and paint for topside and below the waterline? |
Re: 21 Project Part 2 The Finish is Coming
Hey try not to make a mess of this paint job like the last one!!
I want all the lines stright this time around!! That has been bugging me everytime you show that boat! ;) ;D |
Re: 21 Project Part 2 The Finish is Coming
Quote:
On the boat yes but on the motor no i use Zinc primer on the bottom of the motor but reg high build primer on the fiberglass parts on the motors ok MJ lol |
Re: 21 Project Part 2 The Finish is Coming
But whats going on with the V-project. ???
|
Re: 21 Project Part 2 The Finish is Coming
AMAZING!!!!! I doubt I have half your talent but you have inspired me to get back to work on mine. I can't imagine you having any problem selling her she's cherry
|
Re: 21 Project Part 2 The Finish is Coming
here's some pics she went in the yard for sale today
http://i8.photobucket.com/albums/a46...MVC-015S-9.jpg http://i8.photobucket.com/albums/a46...MVC-018S-8.jpg http://i8.photobucket.com/albums/a46...MVC-016S-9.jpg http://i8.photobucket.com/albums/a46...MVC-017S-7.jpg http://i8.photobucket.com/albums/a46...MVC-019S-7.jpg http://i8.photobucket.com/albums/a46...1/MVC-034S.jpg http://i8.photobucket.com/albums/a46...1/MVC-033S.jpg http://i8.photobucket.com/albums/a46...1/MVC-032S.jpg http://i8.photobucket.com/albums/a46...1/MVC-031S.jpg http://i8.photobucket.com/albums/a46...1/MVC-030S.jpg http://i8.photobucket.com/albums/a46...MVC-029S-1.jpg http://i8.photobucket.com/albums/a46...MVC-028S-2.jpg http://i8.photobucket.com/albums/a46...MVC-027S-2.jpg [img] http://i8.photobucket.com/albums/a46/Skools_Out/Monoco%2021/MVC-026S-2.jpg[/img] http://i8.photobucket.com/albums/a46...MVC-025S-4.jpg http://i8.photobucket.com/albums/a46...MVC-024S-4.jpg http://i8.photobucket.com/albums/a46...MVC-023S-4.jpg http://i8.photobucket.com/albums/a46...MVC-022S-5.jpg http://i8.photobucket.com/albums/a46...MVC-021S-6.jpg http://i8.photobucket.com/albums/a46...MVC-020S-6.jpg so what ya think of the finish product? |
Re: 21 Project Part 2 The Finish is Coming
Bad to the bone Skools
|
Re: 21 Project Part 2 The Finish is Coming
looks great 8) I would like to see the seating set up in the back corners. That seating arrangement looks like something I could do with my V.
|
Re: 21 Project Part 2 The Finish is Coming
Looks great Skools!
|
Re: 21 Project Part 2 The Finish is Coming
thanks guys BR has seen the boat personally so he can tell ya what she looks like up close. oh and BR Danny still has that Skiff
|
Re: 21 Project Part 2 The Finish is Coming
Very, very nice maestro! ;D ;D ;D
BR, Danny will always have the skiff :P |
well guys here's the email i just received tonight so yes the 21 is now going to be sold, i'm going to miss that boat so much.
Ok, Great let me know I can bring you a certified check for $8,000.00 on Saturday morning. Thanks Mike |
Congrats!! Took Long enough!:clap:
|
Congrats Skools! That guy got a deal. Did ya show him the photos of the rebuild?
|
he didn't need pics he said lol i offered, it didn't takelong i only finished it in July last yr and really wasn't pushing to sell it, now i'm going to miss it. since i just sold my little dixie boat 2 weeks ago now my 21 is gone. leaves me to finish the 1900 Sea Ox CC the V20 the 250 Sea Ray the 250 Wellcraft but i might buy this 19 ft center console i found for $500 it needs a motor but it is a Bayliner ugh.
|
BAYLINER!! Were is Hammer!!
|
yeah for $500 i get a complete 19 ft cc 1988 boat with T-Top,trailer and a bad 125 Force 1996, but i have a spare 140 Evinrude 1992 here on a motor stand. then i could resale with the 140 for $3000 to $3500.
|
Does Hammer get a discount?? :booty:
|
You can always do like I did with the BAYLINER I bought. Repower it and BEAT THE EVR LIVING SNOT out of it EVRY TIME YOU CAN:sun:. Buy em for a song, and then play bumper boat.
|
Congrats SKools! Its a nice boat. Now about that Bayliner - buy it and paint a Contender logo over the bayline logo. Or you could just call it a Trophy boat.
:beer: |
oh well the Baycrapper has been sold, the guy only took $275 for it what a deal.
|
| All times are GMT -5. The time now is 11:48 PM. |
Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.