Re: Pulpit install / assembly...
 

No word from Warner, I'm surprised he hasn't shown up on this thread ??? I'm going to use a piece of starboard and remount a chain pipe. My old one was probably a chrome over Zamac and is in bad shape. Everyting else is new so.... ;D

I may go with the larger chain pipe? The small one like mine is 1.5" inside. I'm sure it will pass a "chain splice" with 1/2" rope. It won't pass the rope with a prespliced loop with plastic chafe guard. More decisions?

Re: Pulpit install / assembly...
 

LED's in action...

http://i36.photobucket.com/albums/e4...stall008-2.jpg

http://i36.photobucket.com/albums/e4...stall009-2.jpg

http://i36.photobucket.com/albums/e4...stall007-2.jpg

http://i36.photobucket.com/albums/e4...stall006-2.jpg

http://i36.photobucket.com/albums/e4...stall005-3.jpg

Re: Pulpit install / assembly...
 

go large on the deck pipe, had the 1.5 and went to the large oval, makes feeding the chain and line in and out easier. after we go out, i hang the line over the bow rail and rinse & let dry then lay in the cuddy and reload in anchor locker. the large deck pipe makes this sooooo much easier.

Re: Pulpit install / assembly...
 

Thanks Phat. Using the large deck pipe, do have anything connecting the deck to the anchor locker? With pics?

Thanks,

Re: Pulpit install / assembly...
 

Was looking at deck pipes last night on E-Bay. Wasnt sure to go with teh round or oval. Pricey. :-/
Great pics. AIR, looked like a UFO encounter on those first Pics. ;D

Cold and Windy today. Will just look out the window and stair at the V today I think. ;D

Re: Pulpit install / assembly...
 

Hammer great job brother, looks sweet. You should have had Lefty do like those car shows and present it for us ;D

And for your next project, I think you should install a balcony on the back of your house where the sliding glass door is on the second floor. Before CB and the Wind Talker get down there and walk out :o

Re: Pulpit install / assembly...
 

Brother Willy, that is the neighbors house, but who knows, maybe MJ winds up over there anyhow ;D

Re: Pulpit install / assembly...
 

Thought it looked different, thats one h@ll of a drop in the middle of the night ;D

Re: Pulpit install / assembly...
 

AIR, you get stuck cutting any bolts. I did, cut a total of 16 bolts flush with the backing plate. What a pain that was.
Not the best pic., but its still a pic. ;D

http://i47.photobucket.com/albums/f1...r/DSC02584.jpg

Re: Pulpit install / assembly...
 

Hey, now all you guys need is something like this, then you'll be the LED kings ;D

http://cgi.ebay.com/ebaymotors/ws/eB...m=140112696550