Wellcraft V20 Community - Fixing up the 88

Wellcraft V20 Community (https://forums.wmpdevserver1.com/community/index.php)

- General (https://forums.wmpdevserver1.com/community/forumdisplay.php?f=10)

- - Fixing up the 88 (https://forums.wmpdevserver1.com/community/showthread.php?t=3161)

Re: Fixing up the 88

The deck pipe has screws sticking into the cabin about 1.5" the drain tile goes around then and is compressed to fit. there is a 3" hole in the shelf. on mine (83) the top locker feeds into the locker under the bunks in the cuddy. i carry about 250' 1/2 anchor line(rode to you nautical wheelers) with 30 ft of chain. i hate coming back and the anchor has been dragging.

this is a 3 step ladder that helps a lot that is a tank rack i made out of 2 two liter coke crates on plywood with a piece of rubber on the bottom. works greeat and holds 4 tanks with bc's
http://i40.photobucket.com/albums/e2...y/POL_0264.jpg

this is a tank holder system that holds a 80 cf tank upright. i have four of them onboard
http://i40.photobucket.com/albums/e2...y/POL_0266.jpg
shots of the anchor lockers
http://i40.photobucket.com/albums/e2...y/POL_0267.jpg

inside of the connecting tube

http://i40.photobucket.com/albums/e2...y/POL_0268.jpg

http://i40.photobucket.com/albums/e2...y/POL_0269.jpg

Re: Fixing up the 88

That last pic got me all confused?? were is that hole cut?

This would be great for you divers!! I love it.
http://syncboard.com/albums/Boat-Tackle-Box/2_G.jpg

Re: Fixing up the 88

mj that is a shot of inside the anchor locker looking up to the shelf above.

i dived off of a couple of boats with a bracket and it is great. like having a big ole back porch on you boat. the only thing you have to be careful of is anything you set down on the bracket will be washed off. set your gear in the boat not on the bracket.

Re: Fixing up the 88

My boat doesn't have that shelf, Like yours I have the opening in the cuddy, But the liner just stops at that opening allowing the rope to go all the way down.

Thats why my chain keeps getting jamed between the liner and the hull. I have to do something to stop that??

2 weeks I uncover the boaty and start adding and fixing! ;D

Re: Fixing up the 88

Phat, great helpful pics. for us bubble blowers. All I need now is M.J.'s bracket. ;D I dive with high pressure steel 120's.