Re: Teak treatment question
 

I heard you shouldnt Poly teak. *just oil. *I think the oils embedded in the teak eventually cause the Poly to flake off.

Re: Teak treatment question
 

Visited real quick, just long enough to move the engine and
keep the cables greased.
She was very glad to see me, I even thought I saw a smile across the bow.

Re: Teak treatment question
 

;) ;) ;)

Re: Teak treatment question
 

Since it was a tee shirt day today, I decided to pull the rest of the teak off the V today, even with a A$$ kicking tooth acke :-[ Had no idea that the hatch rails were through bolted. Major pain to get off by yourself. >:(

http://i47.photobucket.com/albums/f1...r/DSC02219.jpg

Re: Teak treatment question
 

Anybody know where I can get this black matting stuff at. Mine has a bunch of old drilled holes in it.

http://i47.photobucket.com/albums/f1...r/DSC02218.jpg

Re: Teak treatment question
 

Kick plate wouldnt come off, so I;m sanding and staining it where it is. ;D

http://i47.photobucket.com/albums/f1...r/DSC02220.jpg

Re: Teak treatment question
 

Outside now scrubbing down the teak again.

http://i47.photobucket.com/albums/f1...r/DSC02222.jpg

Re: Teak treatment question
 

First coat of clear coat on the teak. Not looking to bad. ;D

http://i47.photobucket.com/albums/f1...r/DSC02221.jpg

Re: Teak treatment question
 

Hammer try masking tape on the fiberglass above the kick board before you varnish. This way you can let the varnish dry and then pull the tape. I think the varnish will be hard to get off the glass alone.

Re: Teak treatment question
 

Hammer, your an animal. Go to Wallymart in the home section and get yourself some shelf liner. It's got a non skid texture and a little cushion to it. I used spray adhesive to put mine down and then trimmed w/ a razor blade. Came out great. I'll grab a pic tommorrow while I'm out on the ocean trying to better Turbo's monster fish. Oops...did I just say that ;D

Airslot