Re: 21 Project Part 2 The Finish is Coming
 

thanks reel that was my first test tp see if the hole would drain with a motor mounted.

Re: 21 Project Part 2 The Finish is Coming
 

Slick ride!

Re: 21 Project Part 2 The Finish is Coming
 

it's time for a pic change from my big wellcraft what ya think?

Re: 21 Project Part 2 The Finish is Coming
 

Go for it. ;)

By the way, I won the raffle. SKOOl, when can I come and get it. :o ;D

Re: 21 Project Part 2 The Finish is Coming
 

well took for ever to get them clean and lined up correctly plus i replaced the hinge with a new stainless on oh yeah iit's the windsheilds they are on temp to drill holes and then 5200 them on in place but are finally lined up. i haven't peeled the covering off the new side glass yet.

http://i8.photobucket.com/albums/a46...MVC-001S-3.jpg

http://i8.photobucket.com/albums/a46...MVC-002S-3.jpg

http://i8.photobucket.com/albums/a46...MVC-003S-2.jpg

http://i8.photobucket.com/albums/a46...MVC-004S-2.jpg

http://i8.photobucket.com/albums/a46...MVC-005S-2.jpg

http://i8.photobucket.com/albums/a46...MVC-006S-1.jpg

http://i8.photobucket.com/albums/a46...1/MVC-007S.jpg

http://i8.photobucket.com/albums/a46...MVC-008S-1.jpg

http://i8.photobucket.com/albums/a46...MVC-009S-1.jpg

http://i8.photobucket.com/albums/a46...MVC-010S-1.jpg

http://i8.photobucket.com/albums/a46...1/MVC-011S.jpg

http://i8.photobucket.com/albums/a46...MVC-012S-1.jpg

Re: 21 Project Part 2 The Finish is Coming
 

skool its lookin better everyday , r u redoing this boat to sell?? cause it sure is sweet

Re: 21 Project Part 2 The Finish is Coming
 

Redo looks great.

Just curious, how many motors ahve you got sitting around?

Re: 21 Project Part 2 The Finish is Coming
 

Thanks Guys
*yeah it's being redone to be sold, and on the motors i currently have 6 V6 looper 200 / 225 hp J/E motors and 4 V4 140 hp J/E motors, 1 Johnson 3 hp, 8 GM V8's some auto some marine. lets just say way to many motors and 3 Jeep straight 6 motors 4.0 and 4.2

Re: 21 Project Part 2 The Finish is Coming
 

Looks Great!!!!

did you find the black stuff?? Whats the hatch look like?? Looks like it is pretty high, thats a big space under the middle glass.

Re: 21 Project Part 2 The Finish is Coming
 

there use to be a bow cover from this boat, but it was rotted and partly missing so it no longer has one lol. the center window was made to open above it and it made the front like a cabin looked alot like the V20 cabin. it was a cool idea. I haven't found the black filler yet, going to a glass company Monday. did you mean the front center hatch it's a hatch i made and cut in the floor for more storageand hull access. it's 13" x 26"

Re: 21 Project Part 2 The Finish is Coming
 

I was talking about the slider, if it slides under the windshield.
What you going to do about that?? You have one to copy?

Re: 21 Project Part 2 The Finish is Coming
 

All in running condition?
Are they all spoken for?

Now I know who to contact if I need a new motor ;D 8)

Re: 21 Project Part 2 The Finish is Coming
 

MJ i'm confused there's no slider on this boat. never was one. and yeah all run but 1 of the 140's is in a million parts lol

Re: 21 Project Part 2 The Finish is Coming
 

Looking better everday there SKOOL. Yo dee Man. ;)

Re: 21 Project Part 2 The Finish is Coming
 

Never mind!! I have the V20 on my mind, this boat is a bow rider and has no slider!! :-[


Funny I was thinking the same thing, if I got my project boat ;)

Re: 21 Project Part 2 The Finish is Coming
 

Skools...you mentioned a bow-cover...was it canvas type cover?...When I win the raffle, I'm gonna have canvas made to go between the consoles or make a Starboard swinger ;) ...


Man, it's GREAT how the windshield completes the lines of a boat...that REELY looks good !!...didja have to pre-bend the Lexan in those side windows or did it just conform?...


Keep in' my raffle tickets in my ''Lucky Underwear"...can't wait!!... ;D ...

Re: 21 Project Part 2 The Finish is Coming
 

Reel it was a fiberglass bow cover really cool now i wish i kept it and rebuilt. It had wood in it so you could walk up on the front like the V20. I took the old Lexan to a shop and they formed it the same as the old stuff. then i put the frame back together. The lexan i have under that white plastic is a dark tinted glass.

Re: 21 Project Part 2 The Finish is Coming
 

here's a pic of the rubber windsheild trim i'm looking for

http://i8.photobucket.com/albums/a46...MVC-019S-1.jpg

http://i8.photobucket.com/albums/a46...MVC-018S-2.jpg

Re: 21 Project Part 2 The Finish is Coming
 

well i've got to get this boat done i want to work on my street rod so i need the stall in my shop, here's street rod #1

http://i8.photobucket.com/albums/a46...k/MVC-026S.jpg

fenders on top of another car

http://i8.photobucket.com/albums/a46...k/MVC-027S.jpg

http://i8.photobucket.com/albums/a46...54Chevy001.jpg

http://i8.photobucket.com/albums/a46...54Chevy007.jpg

Re: 21 Project Part 2 The Finish is Coming
 

Yeah Skools!!...the REEL Mr. Geeter Dunne :) ...

Re: 21 Project Part 2 The Finish is Coming
 

what ya think of these aluminum wheels on my boat trailer?

http://i8.photobucket.com/albums/a46...MVC-024S-1.jpg

Re: 21 Project Part 2 The Finish is Coming
 

sorry guys no updated lately but been super busy and all but i have gotten a new rub rail from Parker that was a opened package one for a discount cost me $30 ;D it's for their 23 full transom boat what a deal huh complete kit

Re: 21 Project Part 2 The Finish is Coming
 

Speaking of Parker 23's, SO, do you know what brand of seats they use for the rear facing seats on the 23 W/A? And can you get some for $30?

Re: 21 Project Part 2 The Finish is Coming
 

you want ped. seats?
They were $130 a seat with slider, 15" ped, Todd seat and cushions. last set i bought but Boater's World has 2 Todd Ped seats with cushions and 15" ped for $169 a pair.

Re: 21 Project Part 2 The Finish is Coming
 

I used some Dodge wheels on a trailer before, looked like it fit, went on and tightened right up, but 20 miles down the road it wobbled lose and passed me on the highway!!
the other side was also ready to go when I got to the other side!

Re: 21 Project Part 2 The Finish is Coming
 

Skools - I think the center hole on those jeep rims isn't big enough for the hub on the trailer. The only car wheel that I believe fits a standard 5 lug trailer hub are the old Ford Ranger aluminum wheels. Not 100% sure but I think you'll find out soon.

Re: 21 Project Part 2 The Finish is Coming
 

http://i1.ebayimg.com/03/i/000/99/a9/268e_1_b.JPG

Or

http://i24.ebayimg.com/05/i/000/98/c2/c570_1_b.JPG

Re: 21 Project Part 2 The Finish is Coming
 

oh i've had them on Jeep and Ford are the same lug and all so i knew i was good to go. they fit great on another trailer but wanted to keep when i sold the trailer so i took them off to put on another trailer

Re: 21 Project Part 2 The Finish is Coming
 

I'm surprised . . . I have a Jeep Comanche with the exact same wheels and the bearing buddies won't make it through the center hole on those jeep rims.

Re: 21 Project Part 2 The Finish is Coming
 

my bearing buddies come threw the center hole and are out about 1/4 inch to almost flush. makes them look nice with the wheels have stainless shiny centers ;D

Re: 21 Project Part 2 The Finish is Coming
 

well boyz sorry no pics yet to tired but i worked on my wiring this afternoon. tested the motor circuit, lighting, and bilge pump. i came home and the mail man had left me gifts my wiring plugs were in from Jameco.com in Calf. Unlike Mj i'm doing pro job and neat on this wiring.

Re: 21 Project Part 2 The Finish is Coming
 

well more wiring done tonight and worked on the Evinrude 225 i picked up over Easter.

Re: 21 Project Part 2 The Finish is Coming
 

What no pics of the Rudey being taken apart. ;D
You ship me out my seats yet. ;D

Re: 21 Project Part 2 The Finish is Coming
 

what you mean like MJ :'( every one is picking on me :'(

Re: 21 Project Part 2 The Finish is Coming
 

It's ok MJ your wiring is ok if you like spaghetti ;D Well did more work today and have pics will post later tonight

Re: 21 Project Part 2 The Finish is Coming
 

Well today after all wiring and other stuff i decided to install a new lanyard in the boat since it had never had one i thought it would be a nice addition. Here's the dash after all mounted.

http://i8.photobucket.com/albums/a46...MVC-008S-2.jpg

http://i8.photobucket.com/albums/a46...MVC-009S-2.jpg

Here's the back of the ign. switch and control panel. The white net has the warning horn inside it.

http://i8.photobucket.com/albums/a46...MVC-010S-2.jpg

http://i8.photobucket.com/albums/a46...MVC-013S-1.jpg

http://i8.photobucket.com/albums/a46...MVC-016S-2.jpg

Here's the plugs i ordered from Jameco.com one is to connect the motor harness and the other is for the boat harness to the fuse panel.

http://i8.photobucket.com/albums/a46...MVC-015S-2.jpg

http://i8.photobucket.com/albums/a46...MVC-014S-2.jpg

Here's the fuse panel wired

http://i8.photobucket.com/albums/a46...MVC-011S-1.jpg

Here's the 2 lower gauges fuel and voltage.

http://i8.photobucket.com/albums/a46...MVC-012S-2.jpg

Re: 21 Project Part 2 The Finish is Coming
 

nice work skools. That is one area where I do NOT excel, wiring and wiring diagnosis.....yuk.....why is the warning alarm wrapped in that mesh stuff?

Re: 21 Project Part 2 The Finish is Coming
 

wrapped up to protect the main wiring harness from it's weight in one spot and to keep out direct water spray.

THanks i hope it looks good to you guys i strapped up all the wiring with c clips for low voltage wiring, i know the pics are hard to know where it's looking but i was under the dash taking the pics.

Re: 21 Project Part 2 The Finish is Coming
 

Glad to see ya back at work with her. Looking good there SKOOL. ;D

Re: 21 Project Part 2 The Finish is Coming
 

pictures for Hammer lol this is the 1990 motor i picked up over Easter. What ya think i only gave $50 for it, 225 Evinrude 25" shaft.

http://i8.photobucket.com/albums/a46...MVC-001S-2.jpg

http://i8.photobucket.com/albums/a46...MVC-002S-2.jpg

http://i8.photobucket.com/albums/a46...MVC-003S-2.jpg

http://i8.photobucket.com/albums/a46...MVC-004S-2.jpg

http://i8.photobucket.com/albums/a46...MVC-005S-2.jpg

http://i8.photobucket.com/albums/a46...MVC-006S-1.jpg

Took off the heads to look at the salt and to my shock very little, the compression is 90 psi on all but 1 it has 80 so i took the head on this side first and found cylinder has some scoring, i'm going to re-ring her any way then. The marina said it was scrap and they had sold the power pack off due to bad flywheel, all it needed was magnets re-glued, dummies lol.

http://i8.photobucket.com/albums/a46...MVC-007S-1.jpg