Wellcraft V20 Community

Wellcraft V20 Community (https://forums.wmpdevserver1.com/community/index.php)
-   Repairs (https://forums.wmpdevserver1.com/community/forumdisplay.php?f=16)
-   -   Repowering (https://forums.wmpdevserver1.com/community/showthread.php?t=7659)

Blue_Runner 06-25-2007 06:30 PM

Re: Repowering
 
Garage - very nice! That's one sexy clean motor compartment (and motor for that matter).

I too wish I had a garage to tuck my baby into.

BTW - nice Kubota ;) 8)

garagenc 06-26-2007 12:00 AM

Re: Repowering
 
Yea Molly (kubota) has been with me for 4 yrs now and we have done alot of work together. I'm buying a new L34 Kubota next year at the start of landscaping season but I'm keeping Molly!! ;) ::)

garagenc 06-28-2007 11:56 PM

Re: Repowering
 
I laid out of work today and was weed eating the yard @7:30am (Main Muff) cut the grass yesterdayworked/fixed the john boat this morning (rebuily carb abd installed new throttle cable and roller). Works great.

Mowed my sons grass and weedeated his. (he fell 12/21 of last yr and destroyed his right elbow (still is having operations for it). Came home and finished the V-20 motor repower. I fired it up at 2:00 and it fired up on first crank. Now I just need to put all the acc back in and wash the boat so it's ready for this weekend.

Busy day :P :P :P

garagenc 06-30-2007 11:34 PM

Re: Repowering
 
Finished all the acc work including installing a new tach. The old one was showing 2100 rpm at idle and the needle would stck when tthe power was off and then rotating clockwise all the way around so I put a new one in with a hour meter built in the tach.

The main muff helped me all day finishing the Vee and washing it, so tomorrow (Sunday) if we get sun as they are calling for we're going riding in the V and swimming.

Hope everything works as planned.

reelapeelin 07-01-2007 10:04 AM

Re: Repowering
 
Quote:

Originally Posted by garagenc
Finished all the acc work including installing a new tach. The old one was showing 2100 rpm at idle and the needle would stck when tthe power was off and then rotating clockwise all the way around so I put a new one in with a hour meter built in the tach.

The main muff helped me all day finishing the Vee and washing it, so tomorrow (Sunday) if we get sun as they are calling for we're going riding in the V and swimming.

Hope everything works as planned.




Hope yer day goes well, Garage...you and the main muff have done lotta work and need a day in the boat 8) ...ya better bring back some pix or Hammer'll BUST ya ...

Hope your son gets past the elbow problems OK :) ...














garagenc 07-03-2007 12:28 AM

Re: Repowering
 
THANKS REEL
i TOOK SOME PICS BUT OF COURSE IT WAS ON ONE OF THOSE CHEAP THROW AWAY i WANTED TO TAKE SOME OF MY NEIGHBORS BOAT HE HAS A V-21 (1993) AND IT LOOKS LIKE IT IS SHOW ROOM CONDITION, IT MIGHT AS WELL BE HE ONLY HAS 170 HOURS ON IT.

bOAT DID FINE EXCEPT i COULDN'T GET ANY POWER TO THE BILGE PMP, ANOTHER THING TO CHECK OUT.

Hammerhead 07-07-2007 01:29 AM

Re: Repowering
 
Forget the boat...THAT garage is GREAT !!!
(jk about the boat)....who needs a shop like that w/o sumtin to work on. Great job on both counts. I like the orane motor PLUS the size. My V-20 just has a lil'165.

garagenc 07-09-2007 11:07 PM

Re: Repowering
 
Thanks Hammer
I like my garage, it's 36 x 32, the main muff and I went today and got plywood for the ceiling and walls, thats my next project to finish the garage so I can build my work benches and outfit it.



All times are GMT -5. The time now is 09:56 AM.

Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.