Re: Pulpit install / assembly...
 

If the deck pipe hole is not covered by the pulpit,
why not cut the flange on the deck pipe.
So instead of a circle, the flange looks like a D.

Re: Pulpit install / assembly...
 

Hey, thats not a bad idea, and definately look custom. My concern right now is that by butting something against the pulpit I'm leaving myself open to moisture intrusion in the deck. Thats why I have been thinking of repairing the hole and drilling a new one. The old hole is currently sealed on the edges with 4200 as a temporary safety.

Re: Pulpit install / assembly...
 

Starboard cut like D flat edge 45* like the the pulpit, this will allow the edge to slip under theedge of the plupit a little, loys of 5200 and it will never leak!

Re: Pulpit install / assembly...
 

Got starboard?



I do. ;D Hope to work on it tomorrow some, but will certainly be finished by Sunday at the very latest.

Re: Pulpit install / assembly...
 

I spent the day washing my V inside and out, putting all the tools away. She's lookin perdy now. ;D

Re: Pulpit install / assembly...
 

Well why don't you take a picture of it and POST IT!! 8) ...

Re: Pulpit install / assembly...
 

Ahhhhh, you got me on that one Reel. :'(

Re: Pulpit install / assembly...
 

If you're gonna talk the talk you gots to walk da walk brudda ;D :P

Re: Pulpit install / assembly...
 

LOL, I'll snap a quick pic, before I go off to worky. ;)

Re: Pulpit install / assembly...
 

Quick update...after mowing the lawn and having to trim around the V, lack of use you know, I cut my "D" shaped starboard. It came out quite nicely. Wouldn't you know it that my 1-7/8" holesaw is hiding from me. I may have to rotozip this one.

Re: Pulpit install / assembly...
 

:-/ :-/ :-/ :-/ :-/

Re: Pulpit install / assembly...
 

So whats the scoop AIR, you find the hole saw and gotter done. If you gotter done, we ah....need proof. ;D

Re: Pulpit install / assembly...
 

If its proof ya want, then feast your eyes on these...

All done, finished, and complete...

http://i36.photobucket.com/albums/e4...stall002-5.jpg

And because the shackles and thimbled rope ends wont pass throught the smaller deck pipe, I taught myself a new knot, the chain splice...

http://i36.photobucket.com/albums/e4...stall003-4.jpg

So, hows the for, uh, proof ;D

Re: Pulpit install / assembly...
 

Well Air, Congrads on a project well done. ;D

Re: Pulpit install / assembly...
 

Looks great!!

I really wish I had learned years ago how to splice line!! I could never do it now with my fingers.

Now clean her up and start fishing!!

Re: Pulpit install / assembly...
 

Clean up is scheduled for tomorrow, fishing resumes as this darned wind lays out... ;)

Re: Pulpit install / assembly...
 

Adding That starboard to the chain locker looks great. ;)

Re: Pulpit install / assembly...
 

Thanks, now its your turn to "git er done" Hammer ;D

Re: Pulpit install / assembly...
 

;) ;D ;D ;D ;D In June when all the guys are down. LOL.

Re: Pulpit install / assembly...
 

Great work, Slot...LIKEY the way the "D" turned out ... that's what I's tryin' to describe earlier, but just couldn't find the words ;) ... anyway, it came out GREAT!!... now clean her up so ya can take 'er out and get 'er NASTY!! ;D 8) ;D 8) ...

Re: Pulpit install / assembly...
 

Hammer, I got the proper anchor shackle and man, she's a thing of beauty now. Both anchors go through the roller slicker than ....hey REEl help me out herre ;D

Re: Pulpit install / assembly...
 

Picked up a smaller shackle myself, just havent bought any chain or the pipe deck yet. Got side tracked playing with the platform. ;D
Guess we are part of the pulpit click. ;D

Re: Pulpit install / assembly...
 

I think you have to demonstrate use before your in ;D

Re: Pulpit install / assembly...
 

>:( >:( >:( >:( >:( ;D yeah I guess your right. :'(

Re: Pulpit install / assembly...
 

Well, I figured I dust off this old thread here. ;D
Airslot finished his pulpit sometime ago. Not to be called a slacker, I decided to buy this off of E-Bay and finally get my anchor finished and mounted.

http://i47.photobucket.com/albums/f1...r/DSC02722.jpg

Re: Pulpit install / assembly...
 

Re: Pulpit install / assembly...
 

So, you gonna mount it in the living room, or on the "V".

;D

Re: Pulpit install / assembly...
 

nice ashtray

Re: Pulpit install / assembly...
 

I was thinkin' you could fry a egg in it ... ::) ...

Re: Pulpit install / assembly...
 

I thought it was a snuff box ;)

Re: Pulpit install / assembly...
 

Work in progress.

http://i47.photobucket.com/albums/f1...r/DSC02724.jpg

Re: Pulpit install / assembly...
 

Can finally say it's offically DONE. Screwed and 5200 used. Tossed on 10ft. of new chain as well.

Hope this doesnt mean that it's time to pay M.J. for his starboard pulpit idea. :-/
Airslot, did you have to pay. :P ;D ;D ;D ;D
http://i47.photobucket.com/albums/f1...r/DSC02725.jpg

Re: Pulpit install / assembly...
 

It wasn't MJ's idea. ::) ::) ::) ;)

Looks good Mike 8)

Re: Pulpit install / assembly...
 

Thanks Chum.
Just tell me where to send pics. of the vibrating razors and Lefty. ;) 8)

Re: Pulpit install / assembly...
 

;D ;D ;D e-mail works for me. ;)

Re: Pulpit install / assembly...
 

Great job on the pulpit, Hammer...good to have ya back in full form :-* ... ya had me worried there for a while :-[ ...

Slot & Hammer...can ya'll deploy/retrieve those things from the bow hatch or do ya have to get on top? ... not that "on top's" a bad place to be ;D ;D ... heck, on bottom's not bad either come to think of it 8) ...

Re: Pulpit install / assembly...
 

Reel, I've deployed, retieved mine while standing in the hatch every time. *Only time I have to go forward is if I have to "rebend" the snagger tines :o *It's also built well enought to power out of the wreck, or, in one instance I ended up busting off my chain / anchor....so....its obviously heavy enough.

Can you tell that I'm pleased w/ my pukpit ::)

Re: Pulpit install / assembly...
 

Thanks REEL, glad to be back as well. I've repented all of my sins and evil thoughts about going to Bayliner.com. ;D ;D ;D ;D

Re: Pulpit install / assembly...
 

Yep that was CB's Idea from the get go!! I never have to get up top for the anchor, all done from the floor in front.