Wellcraft V20 Community

Wellcraft V20 Community (https://forums.wmpdevserver1.com/community/index.php)
-   Repairs (https://forums.wmpdevserver1.com/community/forumdisplay.php?f=16)
-   -   Skool's V20 Rebuild starts (https://forums.wmpdevserver1.com/community/showthread.php?t=7590)

reelapeelin 06-24-2007 10:20 AM

Re: Skool's V20 Rebuild starts
 
Skools...looks like a smaller tank forward of the main ... whazzat ??? ...



When ya put new floor back in, do ya put a lip under the outter edge to catch?...








Stillrunning 06-25-2007 05:44 PM

Re: Skool's V20 Rebuild starts
 
What is the deal with WellCraft and these little 6x6 pieces of wood they use. The only thing I could think of is they have a slight gap between them and the resin runs between them. If one gets water in it the others have a little protection from the resin between them. By changing to 3/4 wood won't that make it a little tougher to complete the flooring.

msbhammer 06-25-2007 06:10 PM

Re: Skool's V20 Rebuild starts
 
Well.....is it done yet SKOOL. ;D
Where's the Pics. Bro. Dont wanna hear no excuse's that you were sleeping. You never Sleep. ;D ;D

macojoe 06-25-2007 10:23 PM

Re: Skool's V20 Rebuild starts
 
These old guys never read!! Just look at the pictures!!

Quote:

i'm going to remove the extra tank inthe boat it has a 60 gal and an added 25 gal, i'm taking out the 25 and going to add foam to the hull in all the voids to add floation

reelapeelin 06-25-2007 11:41 PM

Re: Skool's V20 Rebuild starts
 
Quote:

Originally Posted by macojoe
These old guys never read!! Just look at the pictures!!




Alright, alright...I missed it, but yer the pot callin' the kettle black :-* ...





Skools Out 06-26-2007 01:26 AM

Re: Skool's V20 Rebuild starts
 
since i'm working on the 230 Sea Ox, so the V is on a temp hold, but almost done with the 230C, well the 1/2 to 3/4 will be fine i'm filling the gap around the edge and will make a channel on the sides to run the water off the deck. i may curve the floor to run the water to the sides too.

Stillrunning 06-27-2007 12:42 PM

Re: Skool's V20 Rebuild starts
 
Quote:

Originally Posted by Skools Out
since i'm working on the 230 Sea Ox, so the V is on a temp hold, but almost done with the 230C, well the 1/2 to 3/4 will be fine i'm filling the gap around the edge and will make a channel on the sides to run the water off the deck. i may curve the floor to run the water to the sides too.

Sounds like your getting fancy. You could name the boat
"Schools Fancy" "V Fancy" or "Well Fancy"

Skools Out 06-28-2007 02:21 AM

Re: Skool's V20 Rebuild starts
 
yeah i like to put my own twist in my projects did you see the dash upgrade in the 21 project ;D

Stillrunning 06-28-2007 02:34 PM

Re: Skool's V20 Rebuild starts
 
Not sure if I did or not but I'll check it out.

reelapeelin 06-29-2007 09:18 AM

Re: Skool's V20 Rebuild starts
 
Le touch de la Skools 8) ...


All times are GMT -5. The time now is 05:13 PM.

Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.