Wellcraft V20 Community
Page 4 of 4 « First 23 4
Show 40 post(s) from this thread on one page

Wellcraft V20 Community (https://forums.wmpdevserver1.com/community/index.php)
-   General (https://forums.wmpdevserver1.com/community/forumdisplay.php?f=10)
-   -   Question about Kwik poly (https://forums.wmpdevserver1.com/community/showthread.php?t=20196)

bradford 08-16-2014 04:06 PM
Quote:
Originally Posted by Striper80 (Post 216293)
Its been tough budgeting my time between my Wellcraft and Grady.

1st World problems my friend!

Striper80 10-18-2014 04:40 PM
I decided to cut open the transom cap. I found the wood going up to the top of the transom was in worse shape than expected. I decided to gut the transom and go with seacast or another pourable material. It stinks because I had to cut out the glasswork and repaired wood.

THEFERMANATOR 10-18-2014 05:23 PM
Quote:
Originally Posted by Striper80 (Post 217566)
I decided to cut open the transom cap. I found the wood going up to the top of the transom was in worse shape than expected. I decided to gut the transom and go with seacast or another pourable material. It stinks because I had to cut out the glasswork and repaired wood.
OUCH! That KWIK POLY treated wood is some TOUGH stuff.


All times are GMT -5. The time now is 07:35 PM.
Page 4 of 4 « First 23 4
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.