Re: 21 Project Part 2 The Finish is Coming
 

How did you put the paint on the floor? Roll it? Or spray it?

Re: 21 Project Part 2 The Finish is Coming
 

Skools, as usual...BEAUTIFUL WORK!!... when you taped off the curves around the drains etc, didja cut 'em w/X-acto or somethin'??...


I can see why you chose that boat for redo ... nice hull ... and if manufacturers did 1/2 the detail as you, boat sales would SURGE 8) ...counter-sinkin' the access was fo' SHIZZLE!!...


That's gonna be an AWESOME Sea-Trial!! 8) 8) 8) ...

Re: 21 Project Part 2 The Finish is Coming
 

i rolled the floor with a firm foam roller,

Reel that's an old painters trick, Lining tape for making flames and other graphics on autos. It's a vinyl tape that comes in different widths like 1/16" to 1" avail in every size between in 16th's, i used a roll of 7/16 for this app. you just run it under your finger and on corners you just twist your finger to the desired shape and once it's on you tape with blue painters tape half over the vinyl. I use this tape first on all painting projects for fine straight lines.

here's a sample on this site but avail at local auto paint supply shops.

https://www.autobodytoolmart.com/p-11359-13973.aspx


http://www.autobodytoolmart.com/imag...edium/4366.gif

Re: 21 Project Part 2 The Finish is Coming
 

8)...that stuff must be pretty flexible to make those tight turns ... apparently so ;) ...

Re: 21 Project Part 2 The Finish is Coming
 

BEEEEEEEEEEEEEEEEEAUTIFUL!! Skools is gonna make some money on that ol girl! I hear ya man! I wish I was half as talented as you when it comes to boats ;)

Re: 21 Project Part 2 The Finish is Coming
 

Well got home ready to work on her and the floor was still soft so i had to do all i could without stepping on the gray.


so i installed the new brass floor drains

http://i8.photobucket.com/albums/a46...MVC-004S-7.jpg

installed the pedestal back in (it's bolted in to a 3/8 thick steel plate i installed under the floor and threaded the holes in the steel to be able to replace the pedestal easy and solid.)

http://i8.photobucket.com/albums/a46...MVC-003S-8.jpg


i installed the front floor hatch and insert box

http://i8.photobucket.com/albums/a46...MVC-005S-7.jpg

and finally installed all the decals

http://i8.photobucket.com/albums/a46...MVC-001S-9.jpg

http://i8.photobucket.com/albums/a46...MVC-002S-9.jpg

sorry boys that's all i could reach so all i did hope to finish the punch list tomorrow.

Re: 21 Project Part 2 The Finish is Coming
 

Well Murphy's Law strikes

i put 7 gallon of mixed fuel in the tank and guess what the new tank LEAKS oh yeah only found out after it was strapped in and foamed in the hull. So i now have removed alot of the foam and drained the tank will remove tomorrow and find and fix all and any leaks i'm pissed at the tank builder. good side i mounted battery tray and battery plus the doors inside the whole boat. plus installd the speed-o sending unit.

Re: 21 Project Part 2 The Finish is Coming
 

Is that a NEW tank, Skools ??? ... BUMMER!! :P ...

Re: 21 Project Part 2 The Finish is Coming
 

yeah but i bought it 4 or 5 yrs ago for the boat and tossed it on a shelf so guess it was bad then but to late now my problem to fix now ugh.

Re: 21 Project Part 2 The Finish is Coming
 

Oh man, thats a bummer about the tank. But she's looking good though. Should be a quick fix for the Skools Monster Shop. Dont you ever sleep. ;D