Wellcraft V20 Community

Wellcraft V20 Community (https://forums.wmpdevserver1.com/community/index.php)
-   Repairs (https://forums.wmpdevserver1.com/community/forumdisplay.php?f=16)
-   -   Skool's V20 Rebuild starts (https://forums.wmpdevserver1.com/community/showthread.php?t=7590)

macojoe 08-05-2007 05:36 PM

Re: Skool's V20 Rebuild starts
 
What are micro ballons?? I have heard about that type of repair but no nothing about it.

msbhammer 08-05-2007 07:23 PM

Re: Skool's V20 Rebuild starts
 
Ballons are thousands of little white balls you mix in with the resin. I guess they give it strenght ???

randlemanboater2 08-06-2007 04:01 PM

Re: Skool's V20 Rebuild starts
 
My 140 4stroke works great on my cuddy. With light fuel and load I get 40 mph, 37 mph loaded up w/ gear, gas, people. But it turns 6000 rpm, might not get the same w/ a 2 poker.

Stillrunning 08-07-2007 06:44 PM

Re: Skool's V20 Rebuild starts
 
Hmmm, I see lots of sanding!!

Skools_Dual 08-08-2007 11:25 PM

Re: Skool's V20 Rebuild starts
 
micro Balloons are brown usually and are little air pockets that allow you to sand resin like bondo, it actually makes the resin weaker lol but makes it very easy to sand, just makes water proof bondo lol.

Bygracealone 08-09-2007 01:54 AM

Re: Skool's V20 Rebuild starts
 
Hey Skools,

When you filled in the bigger holes with wood, resin, and glass, did you put anything on the backside (like tape) in order to keep the resin from pouring through the other side through the voids?

Also, did you use any sort of filler or wood before glassin over the holes for the snaps?

Great work as always maestro ;)

Skools_Dual 08-09-2007 02:31 AM

Re: Skool's V20 Rebuild starts
 
taped the back side of the holes with masking and filled up with resin then glassed over larger holes and the small ones just grind out and then glass and resin over the hole and the fill with resin and micro balloons

msbhammer 08-12-2007 04:31 AM

Re: Skool's V20 Rebuild starts
 
Hey, no pics. Was expecting to see pics. of teh gel coat going on. LOL.
OOPS, I gues I shouldnt say much. I have alot to do as well.
But then again, we do expect alot out of ya SKOOL. ;) :P

Skools_Dual 08-26-2007 06:39 PM

Re: Skool's V20 Rebuild starts
 
here's the v20 sitting outside after the 21 issue


http://i8.photobucket.com/albums/a46...MVC-001S-5.jpg

http://i8.photobucket.com/albums/a46...t/MVC-029S.jpg

http://i8.photobucket.com/albums/a46...t/MVC-030S.jpg

http://i8.photobucket.com/albums/a46...t/MVC-031S.jpg

http://i8.photobucket.com/albums/a46...MVC-032S-1.jpg

http://i8.photobucket.com/albums/a46...MVC-033S-1.jpg

http://i8.photobucket.com/albums/a46...MVC-034S-1.jpg

http://i8.photobucket.com/albums/a46...MVC-035S-1.jpg

Franco 08-26-2007 07:48 PM

Re: Skool's V20 Rebuild starts
 
It's got measles!

Skools_Dual 08-26-2007 08:41 PM

Re: Skool's V20 Rebuild starts
 
i'll cure it soon lol

here's some for Hammer the Sea Ray *;D

http://i8.photobucket.com/albums/a46...x/MVC-043S.jpg

there's the spare parts from the V20 and the Dixie.

My Sea Ox is currently holding all the rubrail and bow rail. If anyone is interested i'll sell them just make offer.

http://i8.photobucket.com/albums/a46...x/MVC-037S.jpg


http://i8.photobucket.com/albums/a46...x/MVC-042S.jpg

msbhammer 08-26-2007 10:34 PM

Re: Skool's V20 Rebuild starts
 
Ahhh, Pics. at last. Thanks man, I needed that fix. ;D

Skools Out 09-13-2007 01:42 AM

Re: Skool's V20 Rebuild starts
 
well i've finished my V and now shes sea foam green and white top see here below the hard top cost more than the boat and made her longer some.


































http://i8.photobucket.com/albums/a46...r/MVC-008S.jpg

msbhammer 09-13-2007 02:07 AM

Re: Skool's V20 Rebuild starts
 
Ok, I'll make an offer for the bow rail. FREE, plus FREE shipping. :-*

reelapeelin 09-13-2007 08:20 AM

Re: Skool's V20 Rebuild starts
 
Love the SeaFoam Green...and yer right...the top DOES make 'er seem a little longer ;D ...

msbhammer 09-13-2007 09:46 PM

Re: Skool's V20 Rebuild starts
 
Hey, what happened to my free overnight shipping. >:(



:P :-*

reelapeelin 09-13-2007 11:40 PM

Re: Skool's V20 Rebuild starts
 
Quote:

Originally Posted by msbhammer
Hey, what happened to my free overnight shipping. >:(



:P :-*



Well Mikey...I rectum ya got wut ya PAID for ;) ;D ;D ;D ...



Skools Out 09-14-2007 12:35 AM

Re: Skool's V20 Rebuild starts
 
still waiting on BGA to visit lol

Bygracealone 09-14-2007 12:55 PM

Re: Skool's V20 Rebuild starts
 
What ya' waiting on me for? Need me to show you how to finish that V? :p

I'll be there at the end of the month buddy, Lord willing...

Skools Out 09-14-2007 09:29 PM

Re: Skool's V20 Rebuild starts
 
"MOVE" on down brother you can come over and we'll build all sorts a stuff, Get BR and Frayed here it will be a true Boat repair party. ;D

Bygracealone 09-14-2007 10:16 PM

Re: Skool's V20 Rebuild starts
 
Ohhh, that move...

Man, like I've said before, had I met you two years earlier, I'd be living in the Raleigh Durham area right now... :-/

Oh, yeah, and I would've been able to keep that 248 because you would have diagnosed my engine troubles for me :P

reelapeelin 09-15-2007 05:18 PM

Re: Skool's V20 Rebuild starts
 
One day, I to shall travel to Mecca...I mean Skool's... 8) ...

parishht 09-26-2007 10:19 AM

Re: Skool's V20 Rebuild starts
 
Hey Skools, last post with update pix was in August :-/,
how's it going? ;) ;)

C YENSEN 09-26-2007 10:28 AM

Re: Skool's V20 Rebuild starts
 
he is working on his jet ski ;)

parishht 09-26-2007 10:31 AM

Re: Skool's V20 Rebuild starts
 
I know, just bustin on him.
;) ;) ;) ;) ;D



And keeping this thread at that top. ::) ::) ::) 8)

Skools Out 09-26-2007 07:07 PM

Re: Skool's V20 Rebuild starts
 
well actually i busted my straight line sander so i'm waiting on one i just bought to get here, that way i can get to work on both. i need that sander to make it look right. i wish it would hurry up cause i want to finish her now. *;D

i'm using the jetski as a test on a glassing idea / test so far it is the way to go making one smooth.

Skools Out 09-27-2007 01:50 AM

Re: Skool's V20 Rebuild starts
 
Here she is sitting under the full moon in the yard waiting on her turn back in the shop.

http://i8.photobucket.com/albums/a46...MVC-008S-6.jpg

i have her hole full of


http://i8.photobucket.com/albums/a46...e/MVC-005S.jpg

http://i8.photobucket.com/albums/a46...e/MVC-007S.jpg

i'm trying to figure out which set i'm using om my white tahoe maybe the chrome set with the new tires off one of the sets in the floor.

Skools Out 10-01-2007 03:32 AM

Re: Skool's V20 Rebuild starts
 
http://i8.photobucket.com/albums/a46...MVC-014S-4.jpg

Skools Out 03-11-2009 10:07 PM

ok guys the warm weekend got me a little bit ready to fix her

pics of the extra tank removed and the dash out the wiring ripped out the steering removed now it's raining and cold it may be a couple weeks for an update but i'm ready to finish her and get some blood n the decks

here she is at the new house beside the Sea Ray 250 FC

http://i8.photobucket.com/albums/a46...t/P1010019.jpg

here's the floor out and foam out

http://i8.photobucket.com/albums/a46...t/P1010006.jpg

http://i8.photobucket.com/albums/a46...t/P1010005.jpg

http://i8.photobucket.com/albums/a46...t/P1010004.jpg

http://i8.photobucket.com/albums/a46...t/P1010001.jpg

http://i8.photobucket.com/albums/a46...t/P1010002.jpg

http://i8.photobucket.com/albums/a46...t/P1010003.jpg

here's the rod box holes

http://i8.photobucket.com/albums/a46...t/P1010018.jpg

http://i8.photobucket.com/albums/a46...t/P1010017.jpg

http://i8.photobucket.com/albums/a46...t/P1010016.jpg

http://i8.photobucket.com/albums/a46...t/P1010015.jpg

here's the spare tank removed and it was full of gas too 30 gallons

http://i8.photobucket.com/albums/a46...t/P1010014.jpg

http://i8.photobucket.com/albums/a46...t/P1010013.jpg

here's the dash out i have since removed all wiring and steering from it and now going to fill all holes in dash and paint pics to come of that

http://i8.photobucket.com/albums/a46...t/P1010012.jpg

http://i8.photobucket.com/albums/a46...t/P1010011.jpg

http://i8.photobucket.com/albums/a46...t/P1010009.jpg

here's the rod boxes in the sea ray to be fixed too

http://i8.photobucket.com/albums/a46...t/P1010008.jpg

here's the bottom layer of skin from the floor

http://i8.photobucket.com/albums/a46...t/P1010007.jpg

the junk found under the floor

http://i8.photobucket.com/albums/a46...t/P1010010.jpg

willy 03-12-2009 07:57 AM

yea baby now we are cooking with gas, been waiting to watch this for a couple of years Todd!:clap:

bradford 03-12-2009 02:17 PM

'Bout time this thread saw a little action! :beer:

randlemanboater 03-12-2009 09:50 PM

Nothing like 80 degrees to get you going.....and 35 degree rain to put a damper on your spirit.

Hey Skools, I saw your 21 down at Blake's Marine yesterday......man it looks good. They have mounted an electric trolling motor on the front.

reelapeelin 03-13-2009 09:29 AM

Alright...intermission's over...let's get back to the SHOW:love:

Skools Out 03-13-2009 11:20 AM

Quote:

Originally Posted by randlemanboater (Post 137866)
Nothing like 80 degrees to get you going.....and 35 degree rain to put a damper on your spirit.

Hey Skools, I saw your 21 down at Blake's Marine yesterday......man it looks good. They have mounted an electric trolling motor on the front.


get some pics i want to see it again:sun:

msbhammer 03-15-2009 11:41 PM

But is it DONE YET !!!. : )

reelapeelin 03-16-2009 08:49 AM

Quote:

Originally Posted by msbhammer (Post 138057)
But is it DONE YET !!!. : )


He's got us on the edge of our seats...just like he always does!!...:love:

Ya big TEASE!!...

msbhammer 03-22-2009 12:09 AM

Yo SKOOL, hoof us up with some pics. brother.

Skools Out 03-22-2009 09:40 AM

if it will stop raining and being like the ice age i'll git r dun lol

reelapeelin 03-22-2009 10:21 AM

Quote:

Originally Posted by Skools Out (Post 138371)
if it will stop raining and being like the ice age i'll git r dun lol


OK...here's yer weather...time to smell the resin
!!...:love:

Skools Out 03-27-2009 09:38 AM

well i stripped the dash and preped to fill all holes and then going to paint.

http://i8.photobucket.com/albums/a46...MVC-005S-6.jpg


All times are GMT -5. The time now is 11:50 PM.

Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.