Wellcraft V20 Community

Wellcraft V20 Community (https://forums.wmpdevserver1.com/community/index.php)
-   Repairs (https://forums.wmpdevserver1.com/community/forumdisplay.php?f=16)
-   -   Repairs Finally Started (https://forums.wmpdevserver1.com/community/showthread.php?t=7631)

msbhammer 08-16-2007 11:39 PM

Re: Repairs Finally Started
 
Twisted Parrot best not be sending you a bracket or a bench seat. >:( >:( >:( ;D

parishht 08-17-2007 01:59 PM

Re: Repairs Finally Started
 
No bracket,
no bench seat,

but it will show up in this thread, when installed. ;) ;) ;)

parishht 08-20-2007 01:50 PM

Re: Repairs Finally Started
 
This weekend I made a few more repairs,
wife had the camera, so no pix.

If I would have been stopped by the coasties, I would have
been fined for no lights,
found the problem, corroded switch, that in itself was a
major accomplishment for me.
Then I added a power outlet for a handheld spotlight,
CEO says I am not going night fishing, well she ain't, but I am.

Cheap West marine hand bilge pump, connected to a water pump
check valve connected to 3/4 pvc pipe, and a rag - any guess's...












fuel tank gas filter.
kept recycling the gas through the rag to get all the crap out of my tank,
I think I got about 80% out.
found that the fuel level sending unit was corroded,
it crumbled in my hands when I ttok it off,
oh well, no gas gauge for me, I will just make sure I always have a full tank.

Old owner had his electonics wires all over the place like spaghetti
around the console.
drilled a hole in the console, installed a rubber grommet
and got rid of the spaghetti.


Next project - redo tank floor cover.

msbhammer 08-20-2007 11:35 PM

Re: Repairs Finally Started
 
No camera. >:( >:( >:( Walmart is just down the road. Drop of that hatch cover, we'll reglass it. ;)

parishht 08-21-2007 11:10 AM

Re: Repairs Finally Started
 
Don't worry HAMMER, I will catch up with my pix.

Anyway, the hatch is not going to be reglassed,
When you see what I am doing, then you will understand why glassing is overkill (for my project).


All times are GMT -5. The time now is 01:56 AM.

Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.