Re: V20 - Side Recessed Panels
 

MY BOXES ARE IN AN ANGLE (TRAPEZOIDAL) AND HAVE AN OVERALL CUT OUT OF 67" PLUS, LAST TIME I CHECKED WITH FP MARINE HE DIDN'T HAVE THAT BIG.
I'LL CHECK AGAIN

LESTERUS
MIAMI

Re: V20 - Side Recessed Panels
 

HOW DO YOU GET INTO THE GALLERIES?

LESTERUS

Re: V20 - Side Recessed Panels
 

go to wellcraftv20.com

thats the main page and you can go to galleries from there. I never figured how to get there from this page.

Airslot

Re: V20 - Side Recessed Panels
 

AIRSLOT:

THANKS FOR THE TIP, I SEE YOUR ROD BOXES ARE A LOT SMALLER THAN MINE, I NEED AT LEAST ONE 67" LONG.

ANYBODY KNOWS HOW TO GET DECALS, AT LEAST THE ONE THAT SAYS V-20?

MY BOAT LOOKS MORE LIKE A V-21.

I REPLACED ALL THE TEAK TRIMMING WITH STARBOAR. TEAK IS BEAUTIFULL BUT THE SUN IN FLORIDA IS BRUTAL.

Re: V20 - Side Recessed Panels
 

All there is to it:

http://i10.photobucket.com/albums/a1..._/Pict0112.jpg

http://i10.photobucket.com/albums/a1..._/Pict0113.jpg

http://i10.photobucket.com/albums/a1..._/Pict0126.jpg

Re: V20 - Side Recessed Panels
 

THANKS FOR YOUR REPLY, MINE ARE EXACTLY LIKE YOURS, HOWEVER I THINK THEY ARE BEYOND REPAIR SINCE THEY HAVE A LOT OF TRIMMING MISSING AND THE BOTTOM HAS BIG HOLES. THE SUN IN FLORIDA IS BRUTAL
PLUS MY KIDS EVERY TIME THE CLIMB ON THE BOAT USE THEM AS A STEP. GO FIGURE!!!!

IF I DONT FIND ONE ALREADY MADE BIGGER THAN 67" I'LL GO TO THESE PEOPLE AND HAVE THEM CUSTOM MADE.

CHEAPER THAT A NEW BOAT!!!!

Re: V20 - Side Recessed Panels
 

Wiseguy, What resin did you use? Epoxy or Poly? Did you color the resin? What weight cloth? I have about 1/2 gallon of epoxy resin left from another boat project, so I will probably use it on my rod boxes. Epoxy resin has a really long shelf life, about 10 years if stored properly.

Re: V20 - Side Recessed Panels
 

The resin is epoxy (west marine 105 and 106 hardener). Don't know about the cloth. You may as well reinforce the corners and such while your in the mood and have your goop mixed up.

The good side was filled/leveled with marinetex, sanded, and painted with topside paint (interlux brightside - white)

Re: V20 - Side Recessed Panels
 

I repaired my boxes as well. They had the typical cracks and bastardized edges, they came out nice.Used the same paint as Wiseguy but I added a black pigment to get a light gray color to "sorta" match the gray deck.

Re: V20 - Side Recessed Panels
 

mine are busted up too going to do the same. i have several corners missing so i'm just going to rebuild out of glass and shape back to original. Lester you could just glass your holes smaller to use FP's rod boxes. It would be much cheaper to glass the holes smaller and replace.