Wellcraft V20 Community - Overhead Picture

Page 3 of 3

Show 40 post(s) from this thread on one page

Wellcraft V20 Community (https://forums.wmpdevserver1.com/community/index.php)

- General (https://forums.wmpdevserver1.com/community/forumdisplay.php?f=10)

- - Overhead Picture (https://forums.wmpdevserver1.com/community/showthread.php?t=4402)

chumbucket

03-16-2005 10:04 PM

Re: Overhead Picture

Yes. New since we went there.

shicks007

03-17-2005 01:23 AM

Re: Overhead Picture

Blue Runner,

Iv'e got a 140 Evinrude on my 76' and I see 5300 rpm at just over 39 mph(gps) and cruise at 4000rpm at 29-30 mph. Iv'e still got saddle tanks in my boat. I installed a fuel/water seporator filter with brass ball valves under the portside splash well. This "tees" my tanks for me.

reelapeelin

03-17-2005 10:05 AM

Re: Overhead Picture

Shicks is right on the money...you need a fuel/water seperator anyway...it has multi-ports in and out... run in from each tank, then out to bulb and motor...in-line shut-offs in each line from tank... ;) ;D...this set-up has worked great in mine for 6 years...

Good luck wichever way you choose... ;D

Blue_Runner

03-18-2005 01:32 AM

Re: Overhead Picture

Shicks, I'm running a 15X17 prop (17pitch). What are you running?

Also, is that by GPS or by a speed sensor on a fish finder?

Thanks for the info.

BR

macojoe

03-18-2005 02:31 PM

Re: Overhead Picture

I think with my out board I was using the same prop. with the 165.

All times are GMT -5. The time now is 04:10 AM.

Page 3 of 3

Show 40 post(s) from this thread on one page