Re: How hard would it be to build?
 

Check out the for sale section un C.Y.

Re: How hard would it be to build?
 

I saw that, let me know if you hear anything.

Re: How hard would it be to build?
 

HEY REEL,

You got any pics of your seat boxes? I know you have a camera. ;)

Re: How hard would it be to build?
 

Reel has twin 40 gallon fuel tanks under his seat boxes, which was a good idea IMO.

RB - just think if you had 80 gallons you would only have to fill up like 2 times each summer!

;D

Re: How hard would it be to build?
 

Randleman...here's the best pic I got
http://i3.photobucket.com/albums/y90...n/P4210005.jpg
I'll get dimensions if ya want...I built these too heavy...they could be made lighter...it's all ply and vinyl...cheap n' quick ;)...each box houses a 40 gal fuel tank ...


How much do ya know or are willing to learn about fiberglass?... :D

Re: How hard would it be to build?
 

Medium density fiberboard, oil based clay, bondo, and PARTALL wax is what I use to make the one off molds (molds that are design to use ONLY once).

http://www.wellcraftv20.com/gallery/...7/P1010005.jpg
http://www.casdvm.com/photos/Tims%20...t/DSCN5855.JPG
http://www.casdvm.com/photos/Tims%20...t/DSCN5856.JPG
http://www.casdvm.com/photos/Tims%20...t/DSCN5860.JPG
http://www.wellcraftv20.com/gallery/...7/DSCN5891.jpg
http://www.wellcraftv20.com/gallery/...7/DSCN5896.jpg

Re: How hard would it be to build?
 

Those seats are just simple boxes very easy to layup. Just use mat and 18oz on the flat surfaces and do all the edges with 1708 tape or 1.5 oz mat. I'd also core the flat areas with 1/2" marine ply squares or some type of foam.

RULE #1 => ONLY use rollers to apply resin on fiberglass mat.

Re: How hard would it be to build?
 

reel how you fill them tanks??

Re: How hard would it be to build?
 

REEL, you made those seat boxes ??, GReat job buddy.
A+ work. ;)

Re: How hard would it be to build?
 

The filler-hose comes from the gunwale side of each tank...then up under the gunwale to filler-caps that go thru the gunwale on each side...aw he!!..I'll go get pix and post ;) ...it'll make Hammer happy too...and ya know what they say about keepin' ya hammer happy!! ;D ...