|
Quote:
|
grinding away
4 Attachment(s)
Started playing with the liner, little modification to marry up to the transom
Stringers had 1/8 to 1/2 inch gaps filled with goop before we pulled the liner. Workmanship in the hull looks like it was started on a Monday and finished Friday afternoon. liner was a different team ! Set our forms on the stringers with the liner in, put in temporary now till the next batch of seacast arrives encasing the rod compartments in glass too Attachment 8038 Attachment 8039 Attachment 8040 Attachment 8041 |
1 Attachment(s)
|
:love: One of the best V for 2021 for sure when you are done with this baby. I have to do my stringers one day, they a-ok for now
|
update
5 Attachment(s)
A lot going on and not much time to post
Got the stringers done to height after putting the liner in for measurements, back off last night and hull moved into glass bays for capping off the stringers today Have decided to rework the liner too since were in this deep, pulling all hardware off it, new bulkheads and more. Restoring original teak. Attachment 8048 Attachment 8049 Attachment 8050 Attachment 8051 Attachment 8052 |
date part two
5 Attachment(s)
Did a test area of bringing back the original gelcoat. first pass on the gelcoat with 400 in the picture, will most likely go to 800, then 1200 and then to 1500 (or more) if needed. The 400 seems to bring the color back about 80%.
Nice thing is they were not bashful with the gelcoat back in 81, pretty thick Attachment 8053 Attachment 8054 Attachment 8055 Attachment 8056 Attachment 8057 |
5 Attachment(s)
A few more from yesterdays progress. I just love the quality of the 80's teak
Attachment 8059 Attachment 8060 Attachment 8061 Attachment 8063 Attachment 8064 |
5 Attachment(s)
Had her in for a fitting and sizing Sunday
Working the oxidation off on the hull and think paint job on the liner might be in order Attachment 8072 Attachment 8073 Attachment 8074 Attachment 8075 Attachment 8076 |
Looks great!
|
2 Attachment(s)
Boys are cranking away on her I'm doing the initial sanding above the waterline till I get down to 800 then Ill let them at it. below waterline for now for them.
Had to pull them off the wellcraft to do the bottom and buff the hull on the big boat to get it in, They banged it out in an afternoon. 12:30 am think ill head home now lol getting to be a habit Attachment 8079 Attachment 8080 Some of our videos for your entertainment https://www.youtube.com/channel/UC9g...lO55p54ALvpASA |
| All times are GMT -5. The time now is 02:26 PM. |
Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.