Wellcraft V20 Community

Wellcraft V20 Community (https://forums.wmpdevserver1.com/community/index.php)
-   Modifications (https://forums.wmpdevserver1.com/community/forumdisplay.php?f=13)
-   -   1985 V20 center console full transom bracket (https://forums.wmpdevserver1.com/community/showthread.php?t=21026)

v20 07-03-2015 11:58 AM

Quote:

Originally Posted by 1224bret (Post 222585)
Just went out and measured mine it's a little over 5" but you should be fine with whatever you have if your other measurements are good. The measurement your looking for really doesn't matter and has to many variables to make a decision based on it. But sounds like your pretty close to where mine is mounted.

Ok great thanks. I think i will stick with my measurements seems to be fine. This is the one step that i wanted to make sure was as close to perfect as possible. Once its on i can turnn back. Thanks for your help brett much appreciated!

v20 07-03-2015 12:08 PM

Yup already did that. Only place i had issues on the boat was in front of the center console. I firmed all that up and put a nice hatch. I can't bealeve the amount of space under the deck that was not utilized for storage. It's mind boggling! Thanks for giving me the heads up to check the transom. When you going to do your bracket?

v20 04-20-2016 07:42 PM

Got some improvments done to "The Rusty Fish Hook"
 
3 Attachment(s)
Quote:

Originally Posted by 1224bret (Post 222143)
Yep like Ridgerunner said in running the 250 merc I got from him on my bracket. Mine is also a 30" bracket. Do you know what the setback is on your bracket? Either way the 150 that you have will probably push your boat pretty good. Any progress on your boat? Pics?

got a few more things I need to do to the boat but hoping to have her in the water in a couple weeks.

Chanhyx 10-26-2016 12:18 AM

Any updates, i have a clean v-20 she's old but solid and worthy of a rebuild...am stepping down from a 27' cc and looking for insight for my build, want to close transom, install a bracket and run a 4 stroke,trim tabs, live well leaning post , fish box in the transom and an upper station...any thoughts or insight is appreciated....i'm new to the site but have been messing with boats for 20+ years....

Destroyer 10-27-2016 04:26 AM

Quote:

Originally Posted by Chanhyx (Post 229888)
Any updates, i have a clean v-20 she's old but solid and worthy of a rebuild...am stepping down from a 27' cc and looking for insight for my build, want to close transom, install a bracket and run a 4 stroke,trim tabs, live well leaning post , fish box in the transom and an upper station...any thoughts or insight is appreciated....i'm new to the site but have been messing with boats for 20+ years....

Welcome to the site.

RidgeRunner 09-26-2017 05:54 PM

Quote:

Originally Posted by Chanhyx (Post 229888)
Any updates, i have a clean v-20 she's old but solid and worthy of a rebuild...am stepping down from a 27' cc and looking for insight for my build, want to close transom, install a bracket and run a 4 stroke,trim tabs, live well leaning post , fish box in the transom and an upper station...any thoughts or insight is appreciated....i'm new to the site but have been messing with boats for 20+ years....

Yup, it is a sickness. I would do the same sans the upper station...and 4-stroke.. You may want to move some weight fore in the boat and consider moving the fish box, batteries and whatever else you can use as ballast toward the bow. Stern weight will be an issue if you don't. V:beer:


All times are GMT -5. The time now is 02:27 PM.

Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.