Wellcraft V20 Community

Wellcraft V20 Community (https://forums.wmpdevserver1.com/community/index.php)
-   General (https://forums.wmpdevserver1.com/community/forumdisplay.php?f=10)
-   -   New Old V20 In Michigan (https://forums.wmpdevserver1.com/community/showthread.php?t=18208)

macojoe 09-14-2012 10:23 PM

Thats a V20!! But I think the transom has been replaced, there fore the VIN will be gone.
Got a lot of work to be done there but she should be great when done!! I had the 165 in my cuddy when I bought it, it was raw water cooled and it ran good the first few years but was rotting from the inside out! I had to replace the head (rot) exhaust riser and manifold (rot) after all that I said one more thing I am making it a Outboard, well it was running ruff and sounding weird, using oil but I was not going to look cause I knew I was going to try fixing it, so end of season I pulled the motor and converted to outboard with a bracket
The new used head I replaced it with rotted out fast and there was water getting in all over the place.
Good Luck with yours!! Get rid of all that plywood screwed to the floor and fix the right way also.

Union Laker 09-14-2012 11:30 PM

Quote:

Originally Posted by macojoe (Post 194689)
Thats a V20!! But I think the transom has been replaced, there fore the VIN will be gone.
Got a lot of work to be done there but she should be great when done!! I had the 165 in my cuddy when I bought it, it was raw water cooled and it ran good the first few years but was rotting from the inside out! I had to replace the head (rot) exhaust riser and manifold (rot) after all that I said one more thing I am making it a Outboard, well it was running ruff and sounding weird, using oil but I was not going to look cause I knew I was going to try fixing it, so end of season I pulled the motor and converted to outboard with a bracket
The new used head I replaced it with rotted out fast and there was water getting in all over the place.
Good Luck with yours!! Get rid of all that plywood screwed to the floor and fix the right way also.


Thanks MJ

Those are just setting on there as hatches, want to replace it all with teak.
Been reading Krackers build & have some pretty good ideas' now.

Nice to know she is a V :news: what year do you think she is? Needs soft floor replaced around the bilge & back of the new tank. She has a nice big tank down in there. What was the 60's V's like think she is of that Vintage?

Kracker Jack 09-15-2012 11:13 AM

What keeps me confused about this boat is the flat lowprofile cap with inner liner with the rodboxes?? They went with the rod box style inner liner when the raised the floor correct? And when they raised the floor they designed it with that high curb style cap correct?

draglink 09-15-2012 11:19 AM

Quote:

Originally Posted by Kracker Jack (Post 194698)
What keeps me confused about this boat is the flat lowprofile cap with inner liner with the rodboxes?? They went with the rod box style inner liner when the raised the floor correct? And when they raised the floor they designed it with that high curb style cap correct?


EXACTLY what I was saying Kracker. The rod holder "boxes" in either side arent correct either. My '79 has them, but the ends are angled, not a rectangle

Hull is either V or from same mold, but the liner is not correct, which is why I have doubts. Can you do a HIN search like a VIN for a car?

Kracker Jack 09-15-2012 11:31 AM

Like mj said that HIN# is gone. And so is mine due to transom repairs. Drag check out the trasnsition line that's bout 2 Or 3 inches below the cap and into the inner liner.

draglink 09-15-2012 11:34 AM

Quote:

Originally Posted by Kracker Jack (Post 194700)
Like mj said that HIN# is gone. And so is mine due to transom repairs. Drag check out the trasnsition line that's bout 2 Or 3 inches below the cap and into the inner liner.

Ahhh yep, GOOD CATCH! that also is incorrect

draglink 09-15-2012 11:36 AM

But there has to be documentation for a HIN on registration, or title. My older V also has missing HIN on transom, but its on the title. How would you register/title it with no HIN at all?

Kracker Jack 09-15-2012 11:56 AM

She is dfinitely a v20 hull, she just been frankenstined a little just like mine. My boat 20 years from know guys are gonna be going "I know its a v20 hull, but that cap and gunwale supports were not factory on a V!!!!"

draglink 09-15-2012 12:08 PM

Quote:

Originally Posted by Kracker Jack (Post 194703)
She is dfinitely a v20 hull, she just been frankenstined a little just like mine. My boat 20 years from know guys are gonna be going "I know its a v20 hull, but that cap and gunwale supports were not factory on a V!!!!"


EXACTLY!! Im with yall, V20 hull with a moddin in different liner.

My buddy just listed a SWEET V20 CC that has been restored...fighting lady yellow...only problem is the time-bomb Ficht on the back. I'll post pics when I run up to look at it!

macojoe 09-15-2012 05:36 PM

he stated the title says boston whaler and he has other stuff leading in a different direction. Chris Craft had a V20 look a like at one point also. But like kracker says someone been messing with it and who knows?

Just fix it and use it, she will be fine!


All times are GMT -5. The time now is 02:08 AM.

Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.