Can't wait to hear how your Bennets work out as I plan on doing the same by spring. My V came with a set of Smart Tabs that I recently removed while doing a transom clean up and bottom stripping. Good luck with your installhttp://www.wellcraftv20.com/communit...ons/icon14.gif

Thanks, it's really not a " normal thing " to drill 3/4" holes in the transom, but .........it's just a transom !!! ha

Go ahead, Phat...there's plenty of BITE in the outter layer of glass to hold it all in place...and believe me it'll all be worth it once yer 'TABBIN'...:clap:

Reels provided me with a few pointers - appreciated......

Once I get the tabs in....I'll be starting on the next bunch of projects:
New vhf and Digital Antenna
New Tachometer
Maybe........ a dual battery set up

Now the tabs are installed, pump mounted, and the tubes connected.
Next the switch and wiring, then done. Slow installation.......like turtle

Nope...sorry...after switch and wiring comes filling w/fluid and priming the system up...then done...:hi:

Yeh, yeh, I'm getting there.........

I had M120's on my V, probably the best mod you can do. Congrats.

Airslot - You have a PM from me.

1. Tabs: All checks out so I've moved on to the rest of my projects.
2. GPS: New power cord for the standard horizon GPS / Plotter fixed that problem.
3. Digital antenna: installed
4. Gunnel rod holders - port and starboard - fixed where the plastic had cracked at the corner.
5. Replaced raw water wash down fitting
More to follow.........