Re: Anchor Pulpit DONE!!
 

Thanks, Stinky...A TM is a "gotta have" slow trollin' live bait for STRIPERS...they hit it like a freight train!!... :o ;D...

Re: Anchor Pulpit DONE!!
 

Outstanding job on the pulpit. Makes me think of adding one to my '86.

Where did you get the V20 tshirt?

Re: Anchor Pulpit DONE!!
 

The Plupit is the balls!!!

As for the shirts, a member here made them and we all bought them. It was a limted run and maybe done again sometime in the furture??

But we will have to see how many people want them again?? Has to be worth his wild. I have 4 :P

Re: Anchor Pulpit DONE!!
 

macojoe - looks great and I might copy for a nice winter project. Just wondering what you will do for a running light? I go past Woods Hole Coast Guard all the time and they love to do those "safety checks".
Thanks,

Keith

Re: Anchor Pulpit DONE!!
 

You will have to use split lights now. They are 2 lights one Red one Green and mount at each bow rail post on eaither side of the pulpit.

You will also need to use a 3/4 block under the light to bring it up to the the height of the bow cause there is a lip there.

If you go thur the pic's again you will see a pic of Raps trolling motor on the bow, you will see his lights the same way.

Hey guys his first post and he knew right were to come!! ;D This is a smart guy, I like him!!

Welcome to the site!! Have fun!

Re: Anchor Pulpit DONE!!
 

Thanks - I see them split in the pics. No need for blocks the cuddy in '91 is flush out to the edge. Just p/u the boat 6 wks. ago and it is a clean slate - all original. Time to drain the wallet.

Re: Anchor Pulpit DONE!!
 

I wanted to have another look at MJ's anchor pulpit, but just got little boxes with X's in them where the pictures are supposed to be ???
Also, my V-20 ('85) doesn't have the little port for the anchor rope/chain - is that something that's easy to find?

Re: Anchor Pulpit DONE!!
 

I have been moving all my pic's to a new server and it broke all the links >:( Sorry!!

I will repost all later today!!

Re: Anchor Pulpit DONE!!
 

OK here are the pic's, but review the hole thread a for instructions and measurements.

Or just ask and I will tell you what ever you need! ;D

http://syncboard.com/albums/Anchor-P..._171.sized.jpg

http://syncboard.com/albums/Anchor-P..._172.sized.jpg

http://syncboard.com/albums/Anchor-P..._173.sized.jpg

http://syncboard.com/albums/Anchor-P..._183.sized.jpg

http://syncboard.com/albums/Anchor-P..._184.sized.jpg

http://syncboard.com/albums/Anchor-P..._185.sized.jpg

http://syncboard.com/albums/Anchor-P..._186.sized.jpg

http://syncboard.com/albums/Anchor-P..._188.sized.jpg

http://syncboard.com/albums/Anchor-P..._197.sized.jpg

Re: Anchor Pulpit DONE!!
 

MJ,

Thanks for the quick reply (I wish the guys I pay to do stuff were that good). I'll look through the thread first and give a holler if I have questions.

This will be a winter project, but not until after I get the thing running and in the water. I got it in July and its been sitting on the trailer since then with me too busy to get at it, except for some cleanup work.

Thanks again - Scott

Re: Anchor Pulpit DONE!!
 

i am going to do that this winter as well, any suggestions or pointers ???

Re: Anchor Pulpit DONE!!
 

This is made with 2 pieces of 3/4 Starboard bolted toghter. You can not glue Starboard toghter, well not easy, so bolting is the way to go.
The bolts are counter sunk on the bottom so that they no stick out.
There are 3 bolts sticking out the bottom from the anchor roller.
on the older V20's there was a 3/4 lip around the edge, thats the reason for the blocks in the rear of the pulpit to get it level.
There is 3 bolts going thur the top of pulpit thur the hull with 1/4 inch diamond plate aluminum for backing plates.

used the cover from a rice cooker to get the round front. *;D

you will need new split lights as you can't use one light anymore.

anything else??