![]() |
Re: MY FIRST BOAT
Hey there! I'm late commin' to the party but welcome from the West Coast. Yup, she needs some work, but I can smell the potential in her from here!!!
TH |
Re: MY FIRST BOAT
do these have a steering lock of some kind or i thing its just STUCK!!
|
Re: MY FIRST BOAT
any ideas on how to fix this
|
Re: MY FIRST BOAT
Quote:
Spray can of Liquid Wrench or PB Blaster...soak it down good coupla times a day for 2-3 day and start puttin' pressure on it...maybe tappin' w/ a hammer...no matter what else, it's GOTTA move ;) ...disconnect it from the motor before you start tappin' it... |
Re: MY FIRST BOAT
Chances are like Reel says. The stiffness is most likely in the motor yoke tube. Given the age of the boat I would thouroghly clean the yoke tube. After spraying down the way Reel said:
Remove the linkage from the steering to the motor, paying attention to the washer locations. Loosen and back off completely the nut for the steering to the motor on the starboard (drivers) side. If there is a grease bushing on the port side remove it. Now try to turn the steering wheel, most likely the starboard side conection will seperate from the motor. The steering linkage connection hole is easily deformed, use caution when banging on the tip to loosen it. Some times you can grab the shaft about 2 inches from the end with vice grips and rotate it to start loosening it up. The most important thing is to clean thourghly and regrease with marine waterproof grease. Cleaning the tube can be done with a long butterfly bit if severly contaminated. Holler if this don't make sence. |
Re: MY FIRST BOAT
Here's the steering removed from the tube, so you have some idea what you're looking at.
http://i175.photobucket.com/albums/w...Picture069.jpg Depending how the motor is mounted it may be a booger. In some instances the motor has to be unbolted from the transom to get enough clearance. |
Re: MY FIRST BOAT
I DO HAVE 4 MANUAL DOWNRIGGERS FOR SALE !!
http://i191.photobucket.com/albums/z...Picture025.jpg http://i191.photobucket.com/albums/z...Picture026.jpg |
Re: MY FIRST BOAT
Jason...how much ya gonna ask for those d'riggers?...
|
Re: MY FIRST BOAT
80.00 for the 2 in the pics
|
Re: MY FIRST BOAT
Quote:
Balls, cables and all components included?... |
Re: MY FIRST BOAT
everything but the balls
|
| All times are GMT -5. The time now is 04:11 PM. |
Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.