Wellcraft V20 Community

Wellcraft V20 Community (https://forums.wmpdevserver1.com/community/index.php)

- Repairs (https://forums.wmpdevserver1.com/community/forumdisplay.php?f=16)

- - Plywood? (https://forums.wmpdevserver1.com/community/showthread.php?t=9295)

Quote:

Originally Posted by bigshrimpin (Post 118496)

I've use doug fir marine plywood a/b. It's about $50 for a sheet of 1/2 and $65 for a sheet of 3/4. Also if you can find MDO (what's used for billboard signs) that is a little less and very good quality usually no voids (comes with 1 or two paper faces).

Sometimes you can find a sign supply shop that will sell you old bill boards for $10 a sheet 4/8 3/4" MDO. I bought 15 sheets from a place at $5 each to do shelves for a friends garage.

Yes nice stuff at the lumber yard I deal with we call it dura ply , the even sell a mahogany veenere plwood , the guys that do the fiberglass decks and roofs love this stuff 1/2 inch for like 23.00 a sheet

Well i checked with LOWES today, and there lumber looked HORRIBLE! Even there cabinet grade plywood had knots in it:bat:. So I ended up going to HOME DEPOT and got a sheet of 3/4" sanded ply and had them cut it to size for me on there big saw. For $38 I got a nice piece of ply with NO knots in it, and had it cut to size as well. Hopefully it works out. I'll start another post with progress pics.

ferm not just a few pics ....... lots there brother

we used treated plywood for our 250 Sportsman deck lamination. :oh: