Re: Rod holder inserts
 

I'll second Flounder Pounder marine. I just ordered the 2 rod boxes, "unfinished" for 115.00 including shipping.
"Ken" at FP was great to deal with.

BTW the unfinished boxes need the holes drilled (2 inch holesaw) and bungee cord retainers installed. I'd rather save $45.00 a box and do it myself.

Re: Rod holder inserts
 

Hey AS did you have the same problem I am...It seems that the inserts are a little too smal for my cutout????

Cutout,though slanted on each ende is about 63inches at the longest point.

New inserts (according to website) 54-55 inches long

height seems to be OK...just wondering because you said you had very minimal trimming but, it looks like those wont even work on my boat w/o fiberglassing in som of the wall??

Re: Rod holder inserts
 

AS,

When you installed yours, what sealant adhesive did you use?

Re: Rod holder inserts
 

I got the 3 rod boxes. The lenght was fine but I had to trim about 1/2 or maybe 1/4" from the top of the cutout if my memory serves me. As far as sealant, I ran an experiment. I had a tude a GE tub and shower pure silicone sealant that I used since it was there. Holding up fine after a year and change.
Airslot