Re: Ok Fix it time!!
 

Great pics MJ. Thanks for the close ups of that fwd hinged unit. I might have to copy your design, looks pretty sweet.

Re: Ok Fix it time!!
 

I still wanna know how you put that gaff holder to the inside of the hull... ???...

Re: Ok Fix it time!!
 

Theres a inside liner to the boat, just screw to it! No big deal.
I will get close up of it for you!!

Be right back!!

Re: Ok Fix it time!!
 

I'm back!!

Here is were i keep the paddle!!

http://img.photobucket.com/albums/v1...e/d3bf66e8.jpg

Here is the boat hook, I took the gaff and other stuff out for cleaning

http://img.photobucket.com/albums/v1...e/f02ff94e.jpg

These are all 1 1/2 PVC with the center cut out custom to each item.

http://img.photobucket.com/albums/v1...e/f02ff94e.jpg

I have a inside liner to my boat, Don't they have them in the newer models??

http://img.photobucket.com/albums/v1...e/75cc6147.jpg

Re: Ok Fix it time!!
 

MJ...if there's a liner there, it's news to me...I'm sure it's not there up closer to gunwales where the original fuel vent locations are...I've looked thru there...One layer...maybe lower...how much seperation between inner and outer...?...

Re: Ok Fix it time!!
 

It goes from the tanks forward.
You would ask me NOW how far from the outter wall it is now!!
I had a few screw holes that I filled today!!

I will try to fing out?? but the screws that hold that bracket is 1 inch at least? and I have no problems??

Re: Ok Fix it time!!
 

Well it's Lunch time! And I have been busy out side!

Here are the old and new side gas tank covers. They are out of 3/8 starboard now, they were 1/2 ply with a vinyl cover before.
The last pic is of the teak strips on the Bow for the sliding hatch.


http://img.photobucket.com/albums/v1...e/e456b387.jpg

http://img.photobucket.com/albums/v1...e/ed502e42.jpg

http://img.photobucket.com/albums/v1...e/62a9eefa.jpg

http://img.photobucket.com/albums/v1...e/ed3dc9c9.jpg

http://img.photobucket.com/albums/v1...e/b3381c68.jpg

http://img.photobucket.com/albums/v1...e/e234a55d.jpg

http://img.photobucket.com/albums/v1...e/d94f9429.jpg

Re: Ok Fix it time!!
 

Well I have quit for the day!! I am tired!!
I have one side all done and the other half done!

After I got going I remembered that I had a problem with one of the gas fillers. It did not screw down well cause the fiberglass was all messed up.
So I cut a piece of Starboard and repaired the site then I remounted the Gas filler. Came out Great!!

Finished side:
http://img.photobucket.com/albums/v1...e/f1e51f26.jpg

Almost done side:
http://img.photobucket.com/albums/v1...e/b0a61915.jpg

Gas fill repair:
http://img.photobucket.com/albums/v1...e/040f103d.jpg

Tomorrow is another day!!

Re: Ok Fix it time!!
 

Ain't Starboard GREAT?... ;) ;D

Re: Ok Fix it time!!
 

Nice work Joe ! How much fuel do you carry with that extra tank in the motor well ?