Wellcraft V20 Community
Page 2 of 3 1 2 3
Show 40 post(s) from this thread on one page

Wellcraft V20 Community (https://forums.wmpdevserver1.com/community/index.php)
-   Repairs (https://forums.wmpdevserver1.com/community/forumdisplay.php?f=16)
-   -   Trailer Hub Question (https://forums.wmpdevserver1.com/community/showthread.php?t=7805)

spareparts 03-15-2007 09:40 AM
Re: Trailer Hub Question
 
pull the hub and measure the spindle with a set of calipers, if you don't have any, use an open end wrench of the same size, ie: 1 1/16 wrench and 1 3/8,

spareparts 03-15-2007 09:40 AM
Re: Trailer Hub Question
 
pull the hub and measure the spindle with a set of calipers, if you don't have any, use an open end wrench of the same size, ie: 1 1/16 wrench and 1 3/8,

reelapeelin 03-15-2007 11:26 AM
Re: Trailer Hub Question
 
Quote:
Originally Posted by Airslot
It's probably 1 3/8" outter by 1 1/16'" inner.



Wouldn't the larger dia. bearing would be on the insde ...

reelapeelin 03-15-2007 11:26 AM
Re: Trailer Hub Question
 
Quote:
Originally Posted by Airslot
It's probably 1 3/8" outter by 1 1/16'" inner.



Wouldn't the larger dia. bearing would be on the insde ...

Mulv80 03-15-2007 12:29 PM
Re: Trailer Hub Question
 
Thanks for the suggestions. I'm picking up a new set of Goodyear Marathons today and will be doing some other maintenace to the trailer. I found a site on Ebay, where for $60 you can buy a new set of hubs completely assembled with stainless lug nuts and bearing buddies. I don't want to worry about the trailer as I plan to take the boat to some different areas this season.

Mulv80 03-15-2007 12:29 PM
Re: Trailer Hub Question
 
Thanks for the suggestions. I'm picking up a new set of Goodyear Marathons today and will be doing some other maintenace to the trailer. I found a site on Ebay, where for $60 you can buy a new set of hubs completely assembled with stainless lug nuts and bearing buddies. I don't want to worry about the trailer as I plan to take the boat to some different areas this season.

reelapeelin 03-15-2007 12:59 PM
Re: Trailer Hub Question
 
Been runnin' Marathons for several years now...TREMENDOUS improvement if you were runnin' bias-ply tires B4...


Good price on those hubs, too ;) ...sounds like ya be ready to go soon 8) ...

reelapeelin 03-15-2007 12:59 PM
Re: Trailer Hub Question
 
Been runnin' Marathons for several years now...TREMENDOUS improvement if you were runnin' bias-ply tires B4...


Good price on those hubs, too ;) ...sounds like ya be ready to go soon 8) ...

macojoe 03-15-2007 02:16 PM
Re: Trailer Hub Question
 
That sounds like a great price!!

My worse fear is to have to leave my boat on the side of the road!!

I had to do it once in 17 years in the spring of 2003, in the spring of 2004 came a brand new trailer!

macojoe 03-15-2007 02:16 PM
Re: Trailer Hub Question
 
That sounds like a great price!!

My worse fear is to have to leave my boat on the side of the road!!

I had to do it once in 17 years in the spring of 2003, in the spring of 2004 came a brand new trailer!


All times are GMT -5. The time now is 10:15 PM.
Page 2 of 3 1 2 3
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.