Re: Motor Loses Power
 

Looks like that wire may be a big problem. It appears to me it goes from that coil to your power pack, and that cylinder probably no longer fires....


Thats my best guess

Re: Motor Loses Power
 

what yr is that motor? can't help without yr for that wire

Re: Motor Loses Power
 

1995

Re: Motor Loses Power
 

Tsubaki's right...if your vents are still below the rub-rail, you could be (probably are) gettin' water into the tank thru them ... do you have a fuel/water separator??...if not, you should go ahead and install one regardless of how this turns out ... if ya do have one, check it for water...

This pic shows where the vent used to be (S'board plate below rub-rail) and where it is now (on the bulkhead behind the spring-line cleat)
http://i3.photobucket.com/albums/y90.../IMGP08812.jpg
your motor problems sound just like mine before relocatin' the vents...

Re: Motor Loses Power
 

Thanks Reel, I will be changing the current fuel/water seperator with a racor 10 micron this weekend I also will be moving the vents up.

Re: Motor Loses Power
 

If yer gonna relocate the vents to that bulkhead, you'll have to find vents with 90* bends in the tubes, unless you can rig up something else...I got 90s for mine and I'm pretty sure MJ did too ;) ...