Re: Transom Cap wont Fit
 

if it is to thick when added a 1/2 in just trim the line up at the sides.

Re: Transom Cap wont Fit
 

SKOOL, dont follow what ya saying. Can you come up and show me. ;D PLEASE :-* :-* :-*

Re: Transom Cap wont Fit
 

add to the transom the cap doesn't fit just cut it to fit on this side

http://i47.photobucket.com/albums/f1...r/DSC02906.jpg

Re: Transom Cap wont Fit
 

Knew what you were saying, but I was just trying to get a extra set of free hands up here with me. ;D

Re: Transom Cap wont Fit
 

Worked late into the night working on installing a 1/2 ply to the inner Transom. Will only be a partial piece, just to fill the void between the splashwell and transom.
Have to grind down my fresh coat of primer. >:(
Should have it glassed in on Friday, then start all over with getting teh cap back on. :-/

Re: Transom Cap wont Fit
 

i am still confused....did you not make the new transom thick enough ??? :-/ or too thick. :-/

Re: Transom Cap wont Fit
 

I"ll find out today when I go and try to put the cap back on, after adding another ply. Gonna test fit before I glass in the additional sheet I installed last night under the spot light. :-/

Re: Transom Cap wont Fit
 

Ok, I finally made the transom cp fit on. Adding the extra ply didnt work. Just pushed everything forward, causing more cutting. The reason the cap wouldnt go on right is that when I rebuilt the transom, so how it got racked at the outside corners. wich is strange because the is the strongest point...at the corners. I was 3/8 out on both corners. Causing me to try and twist the cap on. So it was either scribe in the transom or knotch the cap. So I knotched the cap, cutting off a bit of the rear where it comes over the side. Will need to do a little more glass work, but the cap now fits on. ;D

Re: Transom Cap wont Fit
 

Uh, let me say it ;D

Where's the freakin pix?

Re: Transom Cap wont Fit
 

Well, I didnt want ya to think I was a posting ho AIR.
Ok, lets see what I got to post. Going this morning to start glassing her in. ;)