Re: So I screwed up the ignition wires
 

Just woke up myself and getting ready to do some work on the V as well. Good work there Tsub. 8)

Re: So I screwed up the ignition wires
 

Dang is there an opening for adoption? ;D

Re: So I screwed up the ignition wires
 

Ok I go back out and the switch I am using is a little different then the one you show, but is a 6 pole switch.

But it doesn't have all the markings on it?? So I go to west marine and they don't carry this switch? so I go to there sister store E& B and they say I can order and have next friday I say no thank you!!

Boaters World was closed as all the mariners cause it is Sunday >:(

So I decide to go ahead and try to get her done. But Mickey has been playing under the dash of this boat!!

as you will see in the pictures, I have all the color wires I am supose to have but they have been rerouted some weird way?

Here you will see the yellow with red is going to black and into the control box coming back out as black??
My guess is this is the Neutral saftey and the black should go to the yellow and red spot on the switch?

http://syncboard.com/albums/album05/...dium.sized.jpg

And here is were it goes and comes, it the wire in the right, the wire on the left is the T&T

http://syncboard.com/albums/album05/...dium.sized.jpg

Then the purple wire comes from the harness and goes to some relay off the switch, but there is a rusted off conection that I can not find any were??

http://syncboard.com/albums/album05/...dium.sized.jpg

I am not sure how it was working in the first place?? But I bet this is why the choke switch doesn't work!!

So do we have a pic any were on how this is supose to really be wired??

Re: So I screwed up the ignition wires
 

Why?? Doesn't everyone take a nap in the day??

Re: So I screwed up the ignition wires
 

Skools were is the wireing diagram you posted a long time ago??

what you think of this mess??

Re: So I screwed up the ignition wires
 

That would take me some time even with a correct year model diagram. I was expecting a control box situation.
Is it possible the choke switch portion was remote mounted and not in the switch?
Do you have the correct book on the motor to be able to use the wires color codes and routing?
I'll see what mine has. From what I remember there were a couple of different wire routing capabilities and terminations possible.
Skools most likely can pull this off the top of his head *:-/
I can't.
Is anything simple with you? ;D

Re: So I screwed up the ignition wires
 

Just to clarify for the possibility of having the wrong harness (usually if they connect, it's correct).
What year and hp was the motor that the wire harness and controls came from?
And the year and hp of this motor is a "86 225hp.

Re: So I screwed up the ignition wires
 

Ha Ha nothing is ever simple with me!!!!!!!!

There is no remote switch for the choke, But that doesn't meant there never was??

I just need that color chart skools put up some time back, but I have looked all night and can't seem to find it??

I have a Clymar book, but eletric is not my strong point! The color one was simple to look at for me the simple guy :D

Thanks

Re: So I screwed up the ignition wires
 

MJ, I did a yahoo search on evinrude wire color code and Whaler will pop up. Go into it (continouswave.com I think) and click on Johnson/Evinrude color code. I hope this helps.

Re: So I screwed up the ignition wires
 

Got a wiring diagram in front of me
What you need??


While I'm waiting, I'll try to take pictures of what I think and post them. ::)