Re: heres a question
 

Heck, Slinger...my old gal was laid up B4 screw-in plugs were probably invented... ::) ... it's got one of the rubber exspansion plugs that screws into a copper sleeve...
:D ...

Re: heres a question
 

Heck, Slinger...my old gal was laid up B4 screw-in plugs were probably invented... ::) ... it's got one of the rubber exspansion plugs that screws into a copper sleeve...
:D ...

Re: heres a question
 

Thats a easy fix rap!! Just change over

Re: heres a question
 

Thats a easy fix rap!! Just change over

Re: heres a question
 

yeah, all you have to do is cut the brass tube out with a hole saw just big enough to remove it, seal up the raw wood and glass with resin or epoxy( use a small acid brush and thin the resin), then install a garboard plug over the hole with a good sealant

Re: heres a question
 

yeah, all you have to do is cut the brass tube out with a hole saw just big enough to remove it, seal up the raw wood and glass with resin or epoxy( use a small acid brush and thin the resin), then install a garboard plug over the hole with a good sealant

Re: heres a question
 

Thanks Spare...might just do that some day ;) ...

Re: heres a question
 

Thanks Spare...might just do that some day ;) ...

Re: heres a question
 

;D ;D ;D *From here on in we will refer to them as our blow holes.......lol

Re: heres a question
 

;D ;D ;D *From here on in we will refer to them as our blow holes.......lol