Wellcraft V20 Community

Wellcraft V20 Community (https://forums.wmpdevserver1.com/community/index.php)
-   Repairs (https://forums.wmpdevserver1.com/community/forumdisplay.php?f=16)
-   -   She's inside a warm and spacious garage! (https://forums.wmpdevserver1.com/community/showthread.php?t=23851)

dmoore 11-29-2023 09:27 PM

Polished windshield glass & frames. Anodizing on frames is in amazing condition.!

https://i.imgur.com/uTPQ84Sl.jpg

https://i.imgur.com/PZwKFIsl.jpg

dmoore 11-29-2023 10:04 PM

Quote:

Originally Posted by phatdaddy (Post 251805)
I remember changing out those deck drains, what a PIA. No way to get where u gotta get to get it right. At least those rod box cut outs look far enough toward the stern to get at them.

Hard to tell from photo. Does the fuel cell cavity have a removable deck section on the V21

Where did you get the 90* deck drains?

I have the female 90 Forespar Marelon

https://i.imgur.com/bZhJWnxl.jpg

dmoore 12-03-2023 07:09 PM

Shifted my attention to the original factory 27 year old wiring today. Found several highly corroded wires that turned to dust when touched. Bilge pump wiring was one. Pulled them all out and installed new correct color (brown) lead from multi connector stbd side aft. Removed excess/older wiring. Neatened everything up with neoprene lined SS clamps and wire ties.

I was kind of embarrassed by her outwardly appearance, so I took some time to address that.

https://i.imgur.com/RWdDU0wl.jpg

https://i.imgur.com/asNj0MMl.jpg

https://i.imgur.com/5qCuMBgl.jpg

https://i.imgur.com/LfVNMIOl.jpg

https://i.imgur.com/BDqXRvDl.jpg

https://i.imgur.com/CuVPPyOl.jpg

https://i.imgur.com/5VXWLfel.jpg

dmoore 12-03-2023 07:18 PM

Installed the 5th remaining thru hull today. Fish cooler.

https://i.imgur.com/RduTAJpl.jpg

Giorgio 12-04-2023 08:47 AM

D, she is a beauty GOOD LUCK :beer:

Pipe_Dream 12-04-2023 10:10 AM

Quote:

Originally Posted by dmoore (Post 251824)
Shifted my attention to the original factory 27 year old wiring today. Found several highly corroded wires that turned to dust when touched. Bilge pump wiring was one. Pulled them all out and installed new correct color (brown) lead from multi connector stbd side aft. Removed excess/older wiring. Neatened everything up with neoprene lined SS clamps and wire ties.

I was kind of embarrassed by her outwardly appearance, so I took some time to address that.

https://i.imgur.com/RWdDU0wl.jpg

https://i.imgur.com/asNj0MMl.jpg

https://i.imgur.com/5qCuMBgl.jpg

https://i.imgur.com/LfVNMIOl.jpg

https://i.imgur.com/BDqXRvDl.jpg

https://i.imgur.com/CuVPPyOl.jpg

https://i.imgur.com/5VXWLfel.jpg

:love:

scook 12-07-2023 12:48 AM

Brings back memories of when I decided to clean out wiring from a few generations of electronics in my V-20. Two Saturdays and two 5 gallon buckets nearly full of old wire. What a difference all cleaned out, terminal blocks not corroded any more and new wires and connections done with waterproof heat shrink ends. Very satisfying.

dmoore 12-07-2023 07:40 AM

It's a good feeling when you're out on the water knowing that its done. And the plus side is if you have a problem, it will be a whole lot easier to find and correct.

Destroyer 12-08-2023 01:39 PM

You're going to give Lumber slinger a run for his money as prettiest boat. God I wish I had the space like you do for my boat. Mines all wrapped up for the winter, but that and the cold makes working on it a springtime/summer kind of thing. Less time to actually enjoy it. :beer:

steplift20 12-08-2023 03:07 PM

That was bgreene boat? Dam she is beautiful. How is bgreene doing? I don't see him post anymore. Same with spareparts,,but getting back to your beautiful V21. Reel nice, looks perfect the new boats today don't even come close the the V20 or 21 they are Absolutly perfect boats. Is that a 96 or 95. What was the last year?


All times are GMT -5. The time now is 06:08 PM.

Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.