Link works, thanks

What year is that motor? It looks like it has the clam shell cowl , if you are going to sell it let me know

1981 merc 150
 

Attachment 7966

Attachment 7967

Attachment 79681981
It’s available. Power trim is junk and mounts were cut to get it of the boatAttachment 7966

Jan 2021 quick update on progress
 

Figured I'd give a quick update in pics, Transom poured with SeaCast
Very impressed with the SeaCast

https://youtu.be/HPZaBuK5OIw


This is our primary boating activities



https://www.youtube.com/channel/UC9g...ALvpASA/videos

nice work.

Excellent work, you are on your way to a lovely Boat :clap:

Still at it
 

Got started on the stringer pour this week, went well but a messy job. putting continuing on hold due to the cold temps not going to try to keep the shop 80 degrees when its going to be 9 out
added a pvc wire chase, moving the batteries forward of the fuel tank


Attachment 7987

Attachment 7988

On a Cold Hold for glasswork, so it's prep,prep & prep
 

To cold to pour or glass so it been triple check the leveling of the hull, stringer alignments/heights etc
Happy with the transom height, 24 5/8 right where we wanted it to be.
Have to say these kids are rocking it!




Attachment 8001

Attachment 8002

Attachment 8003

Attachment 8004

Attachment 8005

Stringers poured
 

Got back into the hull over the weekend now that the temps have come out of the teens at night.
How much seacast does it take to do a transom raise to 25" and stringers on a V20 ?
10 5gal pails,
Figured it to be approx 10,000 cubic inches (little under, 9700 ish)
However we came up about a gallon short due to me not informing the mathematician to figure the spine of the hull into the equation.
The block of wood in the stern for the bilge pump was torn out and the area was built up with seacast and glassed in.

Attachment 8027

Attachment 8028

Attachment 8029

Attachment 8030

Fits like a glove ( not OJ’s)

Attachment 8031

Attachment 8032

Attachment 8033

Attachment 8034