Wellcraft V20 Community

Wellcraft V20 Community (https://forums.wmpdevserver1.com/community/index.php)
-   General (https://forums.wmpdevserver1.com/community/forumdisplay.php?f=10)
-   -   Radar installed (https://forums.wmpdevserver1.com/community/showthread.php?t=19728)

000's 10-29-2013 11:34 AM

Ok sorry for the delay of pics, but after being the winner of THE DUMD *** AWARD I just finished the wiring last night.

Just an FYI when splicing cat5 cable DO NOT STRIP THE ENDS OF THE WIRE. I have never messed with it, so like any other wiring project ,strip the wire, install the wire nut etc., in this case, slide the end on ,crimp ,plug in, then the radar works.

Oh hell no. Spent all day trying to find the problem, on the phone with tech support, was getting ready to start replacing all the wiring. My wife was looking at a cat5 cable in the office and said this wire was not stripped. Man a light bulb went off and hour later. When I stripped the ends of the wire the were frayed, when the plug was installed all of the ends were touching one another and caused it not to work.

Thought you would enjoy the story. I will clean up the mess and get the riggers on this week and will post some pics.:you::you:

000's 11-04-2013 08:55 AM

4 Attachment(s)
Attachment 5289

Attachment 5290

Attachment 5291

Attachment 5292

95% Ready to start fishing ,Always something to do. Radar is up and running. All we need is for the fish to cooperate.

inaforty 11-04-2013 10:08 AM

That's one of the best looking V's I have ever seen.
Looks like it came from factory rigged like that.:beer:

willy 11-04-2013 02:06 PM

Gorgeous V20 000, well done

Destroyer 11-04-2013 03:18 PM

Quote:

Originally Posted by 000's (Post 209287)
Ok sorry for the delay of pics, but after being the winner of THE DUMD *** AWARD I just finished the wiring last night.

Just an FYI when splicing cat5 cable DO NOT STRIP THE ENDS OF THE WIRE. I have never messed with it, so like any other wiring project ,strip the wire, install the wire nut etc., in this case, slide the end on ,crimp ,plug in, then the radar works.

Oh hell no. Spent all day trying to find the problem, on the phone with tech support, was getting ready to start replacing all the wiring. My wife was looking at a cat5 cable in the office and said this wire was not stripped. Man a light bulb went off and hour later. When I stripped the ends of the wire the were frayed, when the plug was installed all of the ends were touching one another and caused it not to work.

Thought you would enjoy the story. I will clean up the mess and get the riggers on this week and will post some pics.:you::you:

They even make special RJ45 ends now that you just insert the wires straight thru them and out the front side..This way you can check and make sure your wires are in the correct order, whether you're wiring a 568A, B or crossover cord. Once you've checked your order, and you've crimped the connector, all you do is snip the wires coming out and you're done. No more straining your eyes trying to see the color codes through the connector.
And yes, that's a great story. :beer:

Blue_Runner 11-04-2013 04:13 PM

Jealousy abounds over all those rod holders on that top!

SkunkBoat 11-04-2013 06:12 PM

I have rodholder envy also!

phatdaddy 11-04-2013 06:48 PM

beautiful, when i finally pick the right 6 numbers, i will send you my boat and a no limit credit card.

step up here 11-04-2013 06:54 PM

Ah come on lets see it with gold out.I also have double rigged out riggers and i can run nine on a spread, i would think if you ran all yours thru the wolf pack and got hooked up on everyone they would stop your boat. awesome job good luck fishing!

GREYWOLF 11-04-2013 07:10 PM

MAN !!! I got boat envy , great looking V you most certenly a detail person:nice:


All times are GMT -5. The time now is 12:54 AM.

Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.