Wellcraft V20 Community
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Wellcraft V20 Community (https://forums.wmpdevserver1.com/community/index.php)
-   Performance (https://forums.wmpdevserver1.com/community/forumdisplay.php?f=15)
-   -   Soft and Supple (https://forums.wmpdevserver1.com/community/showthread.php?t=19244)

Steveib 06-07-2013 01:01 PM
You should take the carbs out and clean them up.

Hedge 06-07-2013 02:49 PM
Quote:
Originally Posted by Hedge (Post 204584)
yes it sat for about 18 mos. I tried to purge as much fuel as I could by running it til it died.
Then when I noticed it wasn't running is when I used the SeaFoam.

THEFERMANATOR 06-08-2013 10:31 AM
Sounds like your jets are varnished in the fuel bowls. The carbs still hold quite a bit of fuel even after it quits running. You have to pull the silencer cover and drain them if you plan on storing it for long term without running it.

Hedge 06-08-2013 12:06 PM
Quote:
Originally Posted by THEFERMANATOR (Post 204627)
Sounds like your jets are varnished in the fuel bowls. The carbs still hold quite a bit of fuel even after it quits running. You have to pull the silencer cover and drain them if you plan on storing it for long term without running it.
Is removing the bowl and accessing the jets something I could do fairly easily myself?

THEFERMANATOR 06-08-2013 04:34 PM
Quote:
Originally Posted by Hedge (Post 204638)
Is removing the bowl and accessing the jets something I could do fairly easily myself?
The carbs need to come off to get to the idle and mid range fuel pickup tubes.


All times are GMT -5. The time now is 12:31 AM.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.