Wellcraft V20 Community

Wellcraft V20 Community (https://forums.wmpdevserver1.com/community/index.php)
-   Boats For Sale or Wanted (https://forums.wmpdevserver1.com/community/forumdisplay.php?f=8)
-   -   couple items for sale.... (https://forums.wmpdevserver1.com/community/showthread.php?t=1830)

Stinky_Hooker 06-28-2006 12:09 PM

Re: couple items for sale....
 
Alright guys...here we go:

The hatches..rear 20"w X 24" L

http://www.forumpictureprocessor.com...s/102_0778.jpg


Front 29.25L X 20.5"W (not counting flange
http://www.forumpictureprocessor.com...102_0777_1.jpg


Fuel Tank:

The fill, fuel outlet and sending are at one end with a vent on the other. It has a little dirt on it, but it is brand new..never used. you can even see the yellow cap in the fill inlet.

http://www.forumpictureprocessor.com...s/102_0773.jpg

The tank is 25" w and fits perfectly into a V20 belly area. I had this one in mine for a test fit.


I dont have pics and measurements on the shield yet sorry. I am running by the house in a few minutes and Ill do it next....hang on an hour or so for me.

Stinky_Hooker 06-28-2006 04:10 PM

Re: couple items for sale....
 
http://www.forumpictureprocessor.com...062806_002.jpg



http://www.forumpictureprocessor.com...062806_001.jpg



Length of side at bottom-53.75
length of sie at top -44"


Width at top-26.5"
Width of front glass at bottom -30"


Height of front glass at corner joint- 24"
Height of front glass where it meets walkthrough -"25.5

Skools Out 06-28-2006 06:47 PM

Re: couple items for sale....
 
whats all the measurments of the tank lenght and height w/ fill neck and w/o fill neck?

Stinky_Hooker 06-28-2006 07:50 PM

Re: couple items for sale....
 
Quote:

Originally Posted by Skools Out
whats all the measurments of the tank lenght and height w/ fill neck and w/o fill neck?


You killin me smalls!!!! ;D

Its 25widex8"H at the center add about 2" for the fill neck.......Ill get back to you on the length. ::)

Skools Out 06-28-2006 08:22 PM

Re: couple items for sale....
 
aight tanks n jeeps bro ;D

captbent 06-28-2006 10:32 PM

Re: couple items for sale....
 
I DID NOT SEE A HOW MUCH FOR A STINKY HOOKER I KNOW THEY CAN GO FOR A FEW BUCKS :P

axespino 06-30-2006 11:20 AM

Re: couple items for sale....
 
I did some measurements on the cuddy and the distance on the center of the wood sliders from center to center is 27 1/2 inches. Inside to inside of the sliders is 26 1/2 inches. Will that fit the hatch that you have

Stinky_Hooker 06-30-2006 05:19 PM

Re: couple items for sale....
 
Ill see bud been really busy...trying to fish tomorrow again. Ill check tonight or this weekend...parts are at dads house.

axespino 06-30-2006 07:34 PM

Re: couple items for sale....
 
Sounds good I appreciate you taking the time. Good luck on the fishing trip.

Stinky_Hooker 07-05-2006 11:59 AM

Re: couple items for sale....
 
Quote:

Originally Posted by axespino
I did some measurements on the cuddy and the distance on the center of the wood sliders from center to center is 27 1/2 inches. *Inside to inside of the sliders is 26 1/2 inches. *Will that fit the hatch that you have


Hey I measured mine and it was like 20.5" for the front and 19 for the back panel. Thats alot of difference if yours is 27. *???


Oh and Skools, the tank is 58" long, 24" wide and 8" deep, not counting for the fill neck...add 2" for that.

I measearued the width across the hatches...center to center.


All times are GMT -5. The time now is 11:10 PM.

Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.