Wellcraft V20 Community
Page 2 of 4 1 2 34
Show 40 post(s) from this thread on one page

Wellcraft V20 Community (https://forums.wmpdevserver1.com/community/index.php)
-   General (https://forums.wmpdevserver1.com/community/forumdisplay.php?f=10)
-   -   pre fab radar arch choices, any thoughts? (https://forums.wmpdevserver1.com/community/showthread.php?t=17458)

jasoncooperpcola 04-14-2012 10:16 PM
Quote:
Originally Posted by Illogikal99 (Post 187830)
BTW the difference may be in the finish. Fish-on site mentions powdercoat as the finish but then there is an upcharge for "mirror aluminum" finish. I have to call the company to see if this means anodized or powdercoat faux aluminum... if it is powdercoated, what would be the consensus then?
I plan on a radar arch for the V20. But i want mine powdercoated. Reason? I am too lazy to polish aluminum. Hell the V20 wont even have a single piece of teak when i am done. As long as the powder coat is applied properly and welds are slick i dont see any problem. I just paid $1000 for a bumper for my truck and not impressed with the welds at all. Some welds were overfilled and the powdercoat didn't seal the entire surface so i have some rust now. Just fyi.

I wonder why they dont offer white? I like the Fish On arch. But i am not sure about their foldable mounting system. I would like fixed bases. With my luck it will fold when i dont want it to. :you:

Illogikal99 04-14-2012 10:39 PM
Nice hardtop Macojoe! I guess I could do pullups off the arch after all. AT does nice work without a doubt.

Illogikal99 04-14-2012 11:04 PM
Quote:
Originally Posted by jasoncooperpcola (Post 187839)
I plan on a radar arch for the V20. But i want mine powdercoated. Reason? I am too lazy to polish aluminum. Hell the V20 wont even have a single piece of teak when i am done. As long as the powder coat is applied properly and welds are slick i dont see any problem. I just paid $1000 for a bumper for my truck and not impressed with the welds at all. Some welds were overfilled and the powdercoat didn't seal the entire surface so i have some rust now. Just fyi.

I wonder why they dont offer white? I like the Fish On arch. But i am not sure about their foldable mounting system. I would like fixed bases. With my luck it will fold when i dont want it to. :you:
yeah I figure powdercoat should be fine since my bracket is powdercoated and tough as nails.
BTW the AT arch has the option of adding the folding brackets for an additional $200 or $275, forgot how much it was but the Fish-on arch comes standard with it. I'm just amazed at how overpriced anything "marine" generally is! :bsflag:AT looks great but why so pricey? Fish-on looks better everytime I look at it.

Kracker Jack 04-14-2012 11:34 PM
5 Attachment(s)
This is completely off subject. but MACOJOE I sure do miss my seaox. Seeing pics of that pretty boat you have makes me wish I never sold mine. I painted that boat the same color I painted my Albemarle. That pic of me at the bow with a rum and coke was when I was 27 years old.

Destroyer 04-14-2012 11:41 PM
Quote:
Originally Posted by Illogikal99 (Post 187845)
BTW the AT arch has the option of adding the folding brackets for an additional $200 or $275, forgot how much it was but the Fish-on arch comes standard with it.
My AT tower has the foldable arch system. Simplicity itself.....the two back poles have swivels on them at the bases and the two front poles have pins at the bases that you pull out... pull the pins, push the arch back and it folds down to just about the same height as the windshield. The whole thing takes less than a minute.:love:

Illogikal99 04-14-2012 11:55 PM
Quote:
Originally Posted by Destroyer (Post 187849)
My AT tower has the foldable arch system. Simplicity itself.....the two back poles have swivels on them at the bases and the two front poles have pins at the bases that you pull out... pull the pins, push the arch back and it folds down to just about the same height as the windshield. The whole thing takes less than a minute.:love:
does the arch have any wobble or chatter in it when underway in the rough stuff? should I expect this or should it be solid?

Illogikal99 04-16-2012 08:29 PM
Quote:
Originally Posted by jasoncooperpcola (Post 187839)
I plan on a radar arch for the V20. But i want mine powdercoated. Reason? I am too lazy to polish aluminum. Hell the V20 wont even have a single piece of teak when i am done. As long as the powder coat is applied properly and welds are slick i dont see any problem. I just paid $1000 for a bumper for my truck and not impressed with the welds at all. Some welds were overfilled and the powdercoat didn't seal the entire surface so i have some rust now. Just fyi.

I wonder why they dont offer white? I like the Fish On arch. But i am not sure about their foldable mounting system. I would like fixed bases. With my luck it will fold when i dont want it to. :you:
FYI I spoke to the people at Fish-On Sports, below is thier response to my questions.

The finish is a chrome powdercoat with a clear powdercoat over that. It comes standard with 4 bolt on rod holders.

Also We have a new arch that will be posted today. It is the part#140 It is the same as an UNI Arch but it breaks down so it can ship UPS.
It will be selling for $499.95 with free shipping. It also will come with 4 rod holders.

jasoncooperpcola 04-16-2012 10:37 PM
Just looked at the "Sportsmans UNI-Arch" . I am impressed with it. I wish i could get one while they are on sale. Just can not swing it right now. But for $500 i believe its a good deal. If i can get rid of the 18 Fisherman this week i will order one. :love:

The only thing i dislike is their mounting system. But if its solid and does not squawk or rattle i can live with it.

Destroyer 04-16-2012 10:47 PM
Quote:
Originally Posted by Illogikal99 (Post 187850)
does the arch have any wobble or chatter in it when underway in the rough stuff? should I expect this or should it be solid?
As I said in my first post in this thread, my arch has yet to be installed, so I cannot tell you if it rattles or not. It does appear to be solid in construction, so I think it will be okay. But any arch that is made to fold must, by it's very design, have some play in it. :head:

jasoncooperpcola 04-16-2012 10:52 PM
Quote:
Originally Posted by Destroyer (Post 187905)
As I said in my first post in this thread, my arch has yet to be installed, so I cannot tell you if it rattles or not. It does appear to be solid in construction, so I think it will be okay. But any arch that is made to fold must, by it's very design, have some play in it. :head:
Nothing a spool mig gun wont fix. :bat::bat::bat:

Also, i just noticed they do not offer a color option for the Sportsmans UNI-Arch. Maybe that is why its a little bit cheaper? Here is what they say about color: "The color of these are mirror aluminum."


All times are GMT -5. The time now is 02:35 AM.
Page 2 of 4 1 2 34
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.