Wellcraft V20 Community

Wellcraft V20 Community (https://forums.wmpdevserver1.com/community/index.php)
-   Repairs (https://forums.wmpdevserver1.com/community/forumdisplay.php?f=16)
-   -   Painting deck with Durabak18 Non-Skid (https://forums.wmpdevserver1.com/community/showthread.php?t=16278)

Shawsee 07-14-2011 06:50 AM

Quote:

Originally Posted by ssiredfish (Post 176925)
Yea but the big question is, how do you get Striper blood out of your trunk and bedroom carpet. As soon as you find out please let me know, man have I been worried lately..........

:you:

Well for one thing I do not bring stripers in my bedroom or even put them in the trunk. The stripers are neatly cleaned and cut into fillets and frozen. Also if you are refering to "strippers" (women who expose themselves for cash) I think you have the two words mixed up and you should buy a dictionary. LMAO

ssiredfish 07-15-2011 07:19 AM

Quote:

Originally Posted by Shawsee (Post 177005)
Also if you are refering to "strippers" (women who expose themselves for cash) I think you have the two words mixed up and you should buy a dictionary. LMAO

Oh. did I mistake what we were talkin about?! Just don't tell anyone ok????????

Shawsee 07-16-2011 09:25 AM

Quote:

Originally Posted by ssiredfish (Post 177051)
Oh. did I mistake what we were talkin about?! Just don't tell anyone ok????????

LOL ssiredfish and I knew what you meant. I am just giving you a freindly ribbing back. It's all good buddy, and no big deal I hope.

SkunkBoat 07-18-2011 12:26 AM

adding some info to my post
 
I really like the way the deck feels and sounds now. Like its a solid old wood boat.
Feels good on bare feet too.
And when you drop a 3 oz sinker, it bounces back up...
Looks great! I recommend it.

Mistakes made-

Bought gallon of textured and quart of smooth.
THEY ARE NOT EXACTLY THE SAME COLOR!
Touched up the textured with smooth but you can see the slight difference in color! Don't have enough smooth left to do a full coat.

I did smooth around outside edges and 2 coats of non-skid in the middle.. Didn't take time and really tape off the edges of hatches for a nice factory look.

I would say you should go with gallon of smooth on entire deck 2 coats, let cure, then tape edges neatly and do one light coat of textured.

I did the port side dash with smooth. Had windshield off and went all the way up to the windshield with the paint. It doesn't like vertical surfaces. Runs while its drying. You can't fix it. You can't sand it smooth.

Did the smooth with cheap brushes. Had problem with loose hairs. Tried a foam roller, NOT GOOD...slides. Don't what roller is best for smooth. The special rollers they send with textured worked great for the textured stuff.
I didn't try using one with smooth.

SkunkBoat 08-29-2011 09:35 PM

update: Alcohol and Durabak are a bad combination
 
My drunk brother accidentally emptied a spray can of sunscreen into a puddle in a tackle bag. The alcohol dissolved the fully cured (2 months) Durabak under the bag.
Fixable...if my leftover paint is still good...
Will try to repair while boat is out for Irene.

Hedge 08-29-2011 11:36 PM

That really sucks, but at least you have some left.

RWilson2526 08-30-2011 05:28 AM

Thats what family is for.....

Blue_Runner 08-31-2011 03:25 PM

**NOTE TO SELF: PUT BEER IN SIPPY CUP WHEN ON BOAT**

That's crazy. Thought Durabak was impervious to just about anything, especially something like sunscreen.

reelapeelin 08-31-2011 07:53 PM

That's basically what ethanol does to rubber hoses, diaphrams, gaskets, etc that aren't alcohol compatable...


All times are GMT -5. The time now is 10:59 AM.

Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.