Wellcraft V20 Community - kicker motor and trim tabs question.

Page 2 of 2

Show 40 post(s) from this thread on one page

Wellcraft V20 Community (https://forums.wmpdevserver1.com/community/index.php)

- Modifications (https://forums.wmpdevserver1.com/community/forumdisplay.php?f=13)

- - kicker motor and trim tabs question. (https://forums.wmpdevserver1.com/community/showthread.php?t=15798)

Genie Aye

05-24-2011 10:29 PM

2 Attachment(s)

I have a 8hp merc troller on mine----It has gotten me in many miles in the salt and currents--But it was slow.

I would prefer to have a 15hp for my troller backup motor--same weight as a 9.9hp.

Trim tabs---you bet--Lencos and it made a huge difference in the boat!!!

garbubba

05-27-2011 09:19 PM

My experience is to not put anything behind a chine, not a transducer or trim tabs, the water is pretty turbulent there & air rides down the chines, the clean water is between the chines. Look over the back of the boat running in a chop & you will see what I mean.

Doug

nymack66

05-28-2011 10:43 AM

1 Attachment(s)

I was thinking the same before I installed mine, I however followed this instructions ...http://continuouswave.com/whaler/ref.../trimTabs.html
Here is a picture of mine in the same location as shown..

Genie Aye

05-29-2011 12:07 AM

Quote:

Originally Posted by nymack66 (Post 173958)

Exactly---per instructions. As far as transducers--never behind a chine.:clap:

All times are GMT -5. The time now is 04:22 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page