Wellcraft V20 Community - Evinrude 130 Rectifier?

Page 2 of 2

Show 40 post(s) from this thread on one page

Wellcraft V20 Community (https://forums.wmpdevserver1.com/community/index.php)

- Repairs (https://forums.wmpdevserver1.com/community/forumdisplay.php?f=16)

- - Evinrude 130 Rectifier? (https://forums.wmpdevserver1.com/community/showthread.php?t=15378)

THEFERMANATOR

03-09-2011 01:20 PM

Quote:

Originally Posted by Curapa (Post 169156)

I have actually gotten it running a few times. I have reved it up to around 4k several times. The problem still is intermittent.

It seems the spark results differ day to day. All cylinders have fired a few times, only one cylinder sometimes and other times it's a mixed bag. I never know what cylinder will or will not fire. Today I am only getting spark on the #2 cylinder. All variables are the same during the tests. The coils on the dead cylinders have been swapped and the problem stays on the dead cylinder.

Power pack.

Curapa

03-13-2011 04:20 PM

CDI or Mallory?

Is one brand better than the other? I have used Mallory products before and they have always been great. I have also found the Mallory a bit cheaper than the CDI.

Any comments on the two would be appreciated.

Thanks,

THEFERMANATOR

03-13-2011 11:04 PM

CDI I know makes them for BRP now as I bought one direct from an EVINRUDE dealer awhile back and it had blue SIERRA connectors on it. There all probably the same though actually as there really isn't a large enough market now for more than one company to make them. I believe CDI has a better warranty on them.

Curapa

04-10-2011 12:51 PM

I got the new power pack in yesterday. Put it on this morning and the motor started right up. Problem solved.

Thanks to everyone that helped.

All times are GMT -5. The time now is 07:13 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page