Wellcraft V20 Community

Wellcraft V20 Community (https://forums.wmpdevserver1.com/community/index.php)
-   General (https://forums.wmpdevserver1.com/community/forumdisplay.php?f=10)
-   -   Location of bildges (https://forums.wmpdevserver1.com/community/showthread.php?t=13053)

spareparts 10-30-2009 05:56 AM

Rule has some new "gold" pumps that seem to hold up well, they ought to, they cost enough. I have given up on the "sure bail"(sure fail) switches, they are a good concept, just the wires are not heavy duty enough, they won't hold the amperage of the bigger pumps, Rule has a 20 amp rated float switch that seems to hold up well. I have had good luck with the Johnson pumps, but their switches suck. The smaller Attwood pumps don't seem to be as good as the rules, I like the cartridge concept. It seems every year, they change the base so the last models won't work with the new pumps

phatdaddy 10-30-2009 10:11 PM

when i buy a new bilge pump, i get the extended warrenty. usually not very much and i know the pump will fail so the replacement is free....

NOTHING ELSE MATTERS 11-03-2009 12:48 AM

Mine has a rule 1500 in the back and was thinking of adding one more 1500, my question is; when my boat sits level on the trailer or even if i raise the bow 3-4" i still have water in the front cabin under the step down storage area. I can see the water sitting there and i put a wood dowel in the drain hole and have 1 1/2" of water. I oeder to drain that water i have to raise the bow at least 8-10". Any of you have this problem? That is why the previous owner had a manual pump installed in there. I'm i suppose to have water when boat is level? BTW, that water is fresh water when i cleaned my bilge.


All times are GMT -5. The time now is 11:20 AM.

Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.