Wellcraft V20 Community

Wellcraft V20 Community (https://forums.wmpdevserver1.com/community/index.php)
-   General (https://forums.wmpdevserver1.com/community/forumdisplay.php?f=10)
-   -   New V20 Owner in Nova Scotia (https://forums.wmpdevserver1.com/community/showthread.php?t=12532)

RWilson2526 08-10-2009 08:17 AM

Quote:

Originally Posted by Terrica (Post 145852)
2. The drain in the Live well in the floor, where does that lead? and is there supose to be a bildge pump in there?


Thanks

The drain in the live well/fish box in the floor just dumps straight down into the bilge. If all is well the water will find the pvc pipe that runs under the fuel tank and then out into the bilge where the bilge pump in the back will pick it up. (or go out the drain if you are out of the water)

Mine has a bilge pump in the live well/fish box in the floor which is still operational. I always assumed it was factory and being that you have the hose and the wires I guess that confirms it.

Being that it does not have a float switch, the only reason I can think of that wellcraft put it in there was if you should have the box full of nasty fish stinkin water and kept your boat in slip you could pump it empty any time you wanted to without having to drain it into the bilge and have the other pump pump it out. not really sure though but thats my best guess.

JeanF 08-10-2009 03:10 PM

Welcome to the board Terrica !

Terrica 08-16-2009 06:10 PM

Started to figure it all out.
 
Thanks for all the advice guys, I pulled the steering apart and the actual cable inside the tube broke, the date on the original was 1987 so it was time to break. I ended up getting a new cable system through a friend at wholesale pricing. We intalled that and took it for another test drive, but on the way back we had engine troubles. We think we've picked up water in the fuel (or that's what we're hoping).

The 3 quick drives we've had in the boat, it's awesome.

Thanks for the bildge pump in the livewell, I think I'll re-install one.

Hopefully we'll get it all working soon.

Thanks for all the help, I'm sure I'll ask more questions and I will post pics soon.


All times are GMT -5. The time now is 11:53 PM.

Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.